Error text: Watchdog: BUG: soft lockup CPU#3 stuck [repost]

Moderator: Andrey.Mazlin

Post Reply
Arourdilla
Posts: 13
Joined: Mon Sep 10, 2018 4:38 am

Error text: Watchdog: BUG: soft lockup CPU#3 stuck [repost]

Post by Arourdilla »

Real happy with the mintbox mini 2 pro. But there are some issues.
If power is completely removed. It boots and runs Linux mint cinnamon Tara as expected.
If I shut down using menu options, any combination, or use

Code: Select all

shutdown now
in terminal and let it sit for more than an hour, it enters a standby state - which I do not want. I want to turn off all the power. But the main issue I have is failure to reboot from this standby state.
Instead of booting, after about 2 minutes of blank screen, a 30 second grub screen counts down. Then another blank screen. After a bit, it shows a low res mint logo. Then, another blank screen.
Then; BusyBox error. I type

Code: Select all

help
No echo, no response.
Then; error as posted in the subject line. I have a picture if you'd like one.
Error text is:
Watchdog: BUG: soft lockup CPU#3 stuck for 23s! systems udevd
Info rcu sched self detected stall on cpu #3...-
Something about jiffies.
Please let me know if there is some thing I can do to get this thing to shutdown (turn all the way off) and boot normally after a software shutdown command OR if i should just hold the power button as the only way to remove all power everytime or it will not boot when I push the power button again.

[edit...]
It was suggested that I repost this in fitlet2. the link is for the moderator in case they want to move or delete whichever thread is less useful.

http://www.fit-pc.com/forum/viewtopic.php?f=144&t=6362
[...end edit]
My username is missing a letter m. Thanks auto correct. Thanks a lot.

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: Error text: Watchdog: BUG: soft lockup CPU#3 stuck [repo

Post by tamir »

Issue been reported on this thread:
http://www.fit-pc.com/forum/viewtopic.p ... dog#p21263

Post Reply

Return to “General fitlet2 questions”