Page 1 of 1

No video output from HDMI or DP

Posted: Fri Jun 29, 2018 9:10 pm
by havealoha
The system was working using HDMI on delivery but after a few PXE boot attempts, the system will not output any video. I have removed button battery, reset using the on-board reset button, re-seated memory. I dont know what else to try other than an RMA?

Im afraid that sending an older mismatched architecture pxelinux.0 instead of .efi file over PXE boot somehow corrupted or damaged the firmware / BIOS?

Re: No video output from HDMI or DP

Posted: Mon Jul 02, 2018 12:42 pm
by tamir
Have you change any display related options over the BIOS menu?

you could try to run a restore defaults blindly by following the below:

1. Press DEL repeatedly for ~10 seconds.
2. Wait for NumLock Led to lit, should indicate you're in the BIOS Menu.
3. Press F3
4. Press Enter
5. Press F4
6. Press Enter.

The system should reboot with default configuration.
if operation is successful, we also advise to update you BIOS version to the latest from the below link:
http://fit-pc.com/wiki/index.php/Fitlet2:_BIOS_Update

Re: No video output from HDMI or DP

Posted: Mon Jul 02, 2018 10:16 pm
by havealoha
We can continue this thread via the existing email ticket.

Re: No video output from HDMI or DP

Posted: Tue Jul 03, 2018 12:06 pm
by tamir
Thank you, will do.