fit-IoT Users Forum

Are there settings in the bios that would allow some degree of overclocking on the Celeron (J3455?)version of CPU? Ideally to push core freq to turbo mostly at 2.5Ghz. I know the previous version of fitlet allowed for raising TDP. I see some settings in CPU tab in BIOS but not clear how they impact perf.

Also, can you disable igfx easily to save on package thermals? And re-enable easily if you need to. Since this would be used as a router/gateway it mostly doesn't need video out except in extreme cases.

thanks,
Mark

Overclocking on the Apollo Lake is not supported.
As for disabling igfx to save on power/thermal package:
Please bear in mind that some remote control SW do require the driver to operate.
Make sure you successfully operate an HW reset the machine (without the use of peripherals) following the below procedure before tempering with critical system features:
http://fit-pc.com/wiki/index.php/Fitlet ... leshooting