No Video

DVI, HDMI (or lack of), VGA (or lack of), supported displays
Post Reply
daviddferguson
Posts: 1
Joined: Sun Mar 20, 2011 1:53 am

No Video

Post by daviddferguson »

I have attached an HDMI capable display to the unit with an HDMI cable. I am aware that there will be no audio but there is no video either. Is there a trick to getting the video? I should at least see the system post.

irads

Re: No Video

Post by irads »

Normally fit-PC2 will display splash-screen at boot

The problem may be:
- display configuration issue
- lack of support in your display for VGA 60Hz
- problem with HDMI cable
- HW problem with the fit-PC2

Post Reply

Return to “Display interface”