Hello,
I'm using a lot of FitPC fot standalone windows application.
After installing Windows 7 PRO 32bit, I wish to install MS .NET and other windows application.
It takes a long time and from performance monitor I see around 300/400 ms of latency on HDD....
Could you indicate me why this latency on HDD sata2?
Is there any driver/fix to resolve this issue?
Thanks a lot,
Latency Time on HDD SATA2 3Gbs
Re: Latency Time on HDD SATA2 3Gbs
FitPC2 has an US15W chipset, that features a PATA controller, not the SATA one. Marvell 88SA8052 performs the PATA to SATA conversion
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: Latency Time on HDD SATA2 3Gbs
Hello Gabriel,
Thanks a lot for response.
Could you suggest me the FIT PC that have this Marvell 88SA8052 architecture?
Our application use intense HDD on W/R latency and fragmentation (Video recording dedicated).
Thanks,
Thanks a lot for response.
Could you suggest me the FIT PC that have this Marvell 88SA8052 architecture?
Our application use intense HDD on W/R latency and fragmentation (Video recording dedicated).
Thanks,
Re: Latency Time on HDD SATA2 3Gbs
Hello leosirtel
I think I got you wrong. The Marvell 88SA8052 chip performs the PATA to SATA conversion in the FitPC2. If you want a higher HDD performance, please consider a FitPC3 or Intense PC with a sata III controler.
I think I got you wrong. The Marvell 88SA8052 chip performs the PATA to SATA conversion in the FitPC2. If you want a higher HDD performance, please consider a FitPC3 or Intense PC with a sata III controler.
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.