Fit-PC2 Dead, no lights

Power discussions, CPU and case temperature
Post Reply
riverratt
Posts: 3
Joined: Thu May 03, 2012 1:01 pm

Fit-PC2 Dead, no lights

Post by riverratt »

My Fit PC2 is dead no lights the external power supply is good. Is there any sivicable power supply inside.

Robert

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Fit-PC2 Dead, no lights

Post by gabrielh »

If you press the power button, is there still no lights on?
Gabriel Heifets

Fit-PC2/3/IntensePC support.

riverratt
Posts: 3
Joined: Thu May 03, 2012 1:01 pm

Re: Fit-PC2 Dead, no lights

Post by riverratt »

Nothing happens when I press the power button. No light on the front or back.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Fit-PC2 Dead, no lights

Post by gabrielh »

I suggest you to RMA the unit
Gabriel Heifets

Fit-PC2/3/IntensePC support.

riverratt
Posts: 3
Joined: Thu May 03, 2012 1:01 pm

Re: Fit-PC2 Dead, no lights

Post by riverratt »

Took some time to do some more checks and found the problem. My power cord end is bad. I hope the connector in the Fit-PC2 did not over heat and melt any solder connections.

Is the 12V connector standard?

I am feeding the Fit-PC form a 12V source? To hook it up I cut the power cord off the power supply and spliced it to the 12V power source.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Fit-PC2 Dead, no lights

Post by gabrielh »

FitPC2 needs 12v to operate
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “Power and Heat”