XP driver for 1680x1050 display / IEGD Driver

Post Reply
ToF
Posts: 6
Joined: Mon Jun 14, 2010 8:49 pm

XP driver for 1680x1050 display / IEGD Driver

Post by ToF »

Hi,
I have downloaded the IEGD software : http://edc.intel.com/Software/Downloads/IEGD/

I can't manage to produce a functional driver for XP for my display : depending on options I choose in the IEGD software, either resolution 1680x1050 doesn't appear in the list for display configuration or driver is not functional (means I have a black screen at Windows opening and no signal sent to display).

In IEGD I manage to create a new DTD (see screen copy attached).

I then create a new configuration :
Parameters for the 1st page of IEGD configuration editor : single display, enable display detection, port order : sDVO and then LVDS (see screen copy).

Parameters for 2nd page of IEGD configuration editor : all check boxes ticked for EDID option but I don't know what to parameter for DVO devices, attribute settings so I ticked every choice ...

I didn't filled any option in the attributes pages ... perhaps it is an error ??
Attachments
sDVO configuartion Page : no attributes settings set
sDVO configuartion Page : no attributes settings set
NewConfp2.jpg (60.02 KiB) Viewed 40507 times
New Configuration Page 1
New Configuration Page 1
NewConfp1.jpg (48.93 KiB) Viewed 40508 times
New DTD for Display 1680x1050
New DTD for Display 1680x1050
NewDTD.jpg (56.41 KiB) Viewed 40508 times
Last edited by ToF on Tue Jun 15, 2010 11:44 pm, edited 1 time in total.

ToF
Posts: 6
Joined: Mon Jun 14, 2010 8:49 pm

Re: XP driver for 1680x1050 display / IEGD Driver

Post by ToF »

...

Last screen copy for LVDS configuration (no attributes settings have been parametered).

Page 4 and 5 of configuration set up attached ...
Attachments
New configuration page 5 and last
New configuration page 5 and last
NewConfp5.jpg (75.45 KiB) Viewed 40503 times
New configuration Page 4
New configuration Page 4
NewConfp4.jpg (29.44 KiB) Viewed 40503 times
NewConfp3.jpg
NewConfp3.jpg (59.12 KiB) Viewed 40503 times

ToF
Posts: 6
Joined: Mon Jun 14, 2010 8:49 pm

Re: XP driver for 1680x1050 display / IEGD Driver

Post by ToF »

...

I have then produced a new package with my configuration and target OS : XP/XPe.

Result is not working : black screen at windows opening : no signal detected by my display.

FitPc2i works pretty well and the only issue regards this display driver problem.

Hope you can help.

Best regards.

MyConf : Fit Pc2i (Nr-100521-051) - WinXP Pro SP3 - display Fujitsu Scaleoview H22w-1
Attachments
NewPackage.jpg
NewPackage.jpg (51.63 KiB) Viewed 40497 times

irads

Re: XP driver for 1680x1050 display / IEGD Driver

Post by irads »

IEGD driver generator is beyond the scope of our support. I will try to provide a few tips - but I am not an expert on that. For more details consult IEGD documentation.

fit-PC2 is using only the SDVO interface with a Chrontel CH7307 DVI transmitter. LVDS interface is not used. Settings in IEGD should be chosen accordingly.

Attached please find reference IEGD configuration file for fit-PC2 you can start with. First generate a driver and see it is working, then modify configuration as per your needs.
Attachments
fit-PC2_IEGD_10.3.cnfg.zip
(1.39 KiB) Downloaded 682 times

Post Reply

Return to “Display driver”