fit-PC Users Forum
http://www.fit-pc.com/forum/

Resume from Standby problems
http://www.fit-pc.com/forum/viewtopic.php?f=45&t=2045
Page 1 of 2

Author:  jdbarney [ Fri Dec 10, 2010 8:47 pm ]
Post subject:  Resume from Standby problems

I have about a half-dozen FitPC2 revision 1.21 machines running WinXP that have no problem going into standby mode and resuming standby from a scheduled task. I just purchased five more FitPC2 units (revision 1.4). These machines, running the same image, will go into standby without issue. But resume from standby works maybe once out of every 20 attempts.

Once the machine goes into standby, pressing the power button will cause the power LED to illuminate and the physical NIC port lights come on - but nothing else. No video signal, no hard drive activity, nothing.

I've updated all the drivers to no avail. I've tried multiple different ways to get the machine to come out of standby - there is no rhyme or reason why it does or does not work. Help please! I really need this to work as reliably as it did on the original models.

Author:  Leonid [ Mon Dec 13, 2010 11:38 am ]
Post subject:  Re: Resume from Standby problems

Please, enter the BIOS and check the BIOS Date on the Main screen.

Author:  jdbarney [ Mon Dec 13, 2010 4:01 pm ]
Post subject:  Re: Resume from Standby problems

BIOS revision is 04/21/10

Author:  Leonid [ Wed Dec 15, 2010 12:42 pm ]
Post subject:  Re: Resume from Standby problems

Please, update the BIOS to "12 May 2010" revision:
http://www.fit-pc2.com/wiki/index.php?t ... _ROM_Files

How to update BIOS:
http://www.fit-pc2.com/wiki/index.php?title=BIOS_Update

Author:  jdbarney [ Wed Dec 15, 2010 1:40 pm ]
Post subject:  Re: Resume from Standby problems

Is there more to that BIOS update than is reflected in the change log? I am quite certain that adding PXE boot support is not going to solve a system standby issue. Please explain - thank you.

Author:  Leonid [ Wed Dec 15, 2010 2:45 pm ]
Post subject:  Re: Resume from Standby problems

The system is more stable with latest BIOS.

In addition, the BIOS update helped to one of users to solve the sleep-resume problem on Win7:
viewtopic.php?f=53&t=2046&start=0&hilit=solved

Author:  jdbarney [ Wed Dec 15, 2010 3:42 pm ]
Post subject:  Re: Resume from Standby problems

Okay. I will try it and report back.

Author:  jdbarney [ Wed Dec 15, 2010 5:22 pm ]
Post subject:  Re: Resume from Standby problems

I applied the latest BIOS. Behavior resuming from standby remains unchanged. Any further suggestions?

Author:  Leonid [ Thu Dec 16, 2010 9:45 am ]
Post subject:  Re: Resume from Standby problems

We will continue to investigate this issue. You will be informed about results ASAP.

Author:  tech [ Thu Mar 31, 2011 3:33 pm ]
Post subject:  Re: Resume from Standby problems

I use two fit-PC2 D2G-C2000-W ACF 101202-027/-028 .
BIOS version 05/12/10
Resume from standby works wrong. The PC wakes up, but USB und graphic-output is not active - same behaviour on both PCs.
I used the harddisk with fine working installation (Win XP Pro SP3) including standby function from a fit-PC2 D1G-C1100-ACF 100818-006. Perfect functionality on this PC, but using this harddisk in one of the PCs above produces the resume error (no USB power and signal, no graphic). Who can help ?

Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/