I am testing the fit-PC2 for a remote embedded application in conjunction with a USB modem. I have installed the USB modem and set it up so that the USB modem will connect automatically on PC start up running Windows XP. If I power cycle the PC the USB modem is still recognised and connects automatically. Upon further testing if I leave the PC unpowered over night and re-power the PC the USB modem is not recognised and "new hardware detected" is displayed. This is not ideal for a remote embedded application that must work when power is applied, power can be removed or applied in a random fashion.
Tue May 03, 2011 5:04 pm
Joined: Thu Jun 02, 2011 1:13 pm Posts: 1158
Re: USB Modem "New device detected"
Hi I suggest you to try different USB port or powered USB hub if it's doesn't help. Also if you can, check the modem on a different winxp machine in same conditions.
_________________ Gabriel Heifets
Sun Jun 05, 2011 7:57 am
Joined: Wed Apr 20, 2011 1:11 pm Posts: 15
USB Modem "New device detected"
I have sorted this issue. It had to do with the USB modem firmware.
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum