Re: Using fit-VGA with fit-PC3 in Windows 7
Posted: Sun Feb 19, 2012 11:40 am
1. Download the attached patch.
3. Unzip the patch, and place the amd_edid.bat file in to the programs\startup folder, or use this DOS code
4. Reboot the system.
5. Your Fit-PC3 will reboot several times until you will be able to see the Windows 7 screen under the VGA mode, please be patient.
Please note: this patch uses general VGA screen EDID. If you have issues with your screen using this patch, please use your own EDID data, and replace with it the “Data2” value from the amd_edid.bat
2. Start your Fit-PC3 with the Safe Mode (you should hold F8 key before Windows 7 will start).3. Unzip the patch, and place the amd_edid.bat file in to the programs\startup folder, or use this DOS code
Code: Select all
copy /Y amd_edid.bat %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
5. Your Fit-PC3 will reboot several times until you will be able to see the Windows 7 screen under the VGA mode, please be patient.
Please note: this patch uses general VGA screen EDID. If you have issues with your screen using this patch, please use your own EDID data, and replace with it the “Data2” value from the amd_edid.bat