OpenBSD 4.6

Post Reply
spkf
Posts: 1
Joined: Sun Oct 25, 2009 2:35 pm

OpenBSD 4.6

Post by spkf »

Hi,

Does anyone has succeeded install the new release OpenBSD 4.6 on Fit-PC2 ??
What is working or not ?

Thx

ido
Posts: 3
Joined: Fri Apr 16, 2010 10:10 pm

Re: OpenBSD 4.6

Post by ido »

I would also like to know the answer to this question.

Specifically, I would like to know whether OpenBSD supports the NIC chipset in fitPC2i which is Realtek 8111c. Tried googling it, but got mixed results.

Thanks in advance, Ido.

not-a-bob
Posts: 3
Joined: Sun Apr 25, 2010 9:43 pm

Re: OpenBSD 4.6

Post by not-a-bob »

I don't know, but I plan on finding out once mine arrives in a week or two. I'll also be testing FreeBSD 8 on it.

Will post my results.

ido
Posts: 3
Joined: Fri Apr 16, 2010 10:10 pm

Re: OpenBSD 4.6

Post by ido »

*crossing fingers*

not-a-bob
Posts: 3
Joined: Sun Apr 25, 2010 9:43 pm

Re: OpenBSD 4.6

Post by not-a-bob »

Success with OpenBSD 4.6 32 bit. Both nics and the wireless were detected and seemed to work. I did not test X or sound.

I had some issues with FreeBSD 8.0, but I think they were the result of an old gpart scheme on the drive, and/or some strangeness with 8.0's installer. I'm installing 7.3 on the machine now and it seems to work, at least the nics do.

not-a-bob
Posts: 3
Joined: Sun Apr 25, 2010 9:43 pm

Re: OpenBSD 4.6

Post by not-a-bob »

Ah, there was a bios option I had to tweak, something about the hard drive was set to DOS. Setting that to Other got me past the seg fault w/FreeBSD 8.

ido
Posts: 3
Joined: Fri Apr 16, 2010 10:10 pm

Re: OpenBSD 4.6

Post by ido »

Thank you very much! I'll be ordering my fitPC2i very soon! :D

nlg
Posts: 1
Joined: Sat Aug 21, 2010 7:08 pm

Re: OpenBSD 4.6

Post by nlg »

Can I get a confirmation on that audio/video works properly?

fly
Posts: 162
Joined: Thu Jul 22, 2010 2:02 pm

Re: OpenBSD 4.6

Post by fly »

Can I get a confirmation on that audio/video works properly?
Video will probably not work, as the gma500 drivers are closed source and even with linux they are poor supported. If you only need basic 2d via vesa mode, you should be okay.

Post Reply

Return to “Other operating systems on fit-PC2”