We have deployed a fit-pc on industrial application.But we are facing 2 major issues.
1)Whenever there is a power loss the device is turned off and when the power comes back,the machine is not booting at all sometimes(30% accuracy).It is showing "operating system not found".It is showing "failed to load PXE ROM".
2)If at all the device boots up it is failing to recognize the usb devices connected to it.Sometimes it shows as connected and sometimes it detects.
These are the major issues that we are facing and because of this uor deployment is delayed.
Please consider this and oblige
Regarding issues on FIT-PC
Re: Regarding issues on FIT-PC
Hello
Do you use boot from LAN option, or your OS installed on internal HDD?
Do you use boot from LAN option, or your OS installed on internal HDD?
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: Regarding issues on FIT-PC
The OS is in internal HDD.
Because we dont use LAN at all.
Because we dont use LAN at all.
Re: Regarding issues on FIT-PC
Can you please specify me the devices connected to usb port?
Can you please check that usb current drain not exceed 1.5 A in a sum
Can you please check that usb current drain not exceed 1.5 A in a sum
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: Regarding issues on FIT-PC
I have the same problem. I am running Ubuntu Server 9.10 and sometimes if I reboot, "No Operating System found" error message is displayed. I couldn't get it up and running anymore, needed re-install.
We also have it in production environment and the bug/problem is very critical.
We also have it in production environment and the bug/problem is very critical.
Re: Regarding issues on FIT-PC
Hi Juha
I would like to ask you the same question: have you usb devices attached to the FitPC2 that their overall current drain exceed 1.5A or more then 0.5A from a single usb port?
Thanks
I would like to ask you the same question: have you usb devices attached to the FitPC2 that their overall current drain exceed 1.5A or more then 0.5A from a single usb port?
Thanks
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: Regarding issues on FIT-PC
I have one usb (rs486 adapter) device attached. But I don't know how much it drains.
Re: Regarding issues on FIT-PC
Please try to attach the adapter to a self powered USB hub
Thanks
Thanks
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.