Removing the Hard Drive

Post freely any questions you have about fit-PC2
Post Reply
wispa
Posts: 5
Joined: Fri Mar 20, 2009 1:19 pm

Removing the Hard Drive

Post by wispa »

I'm having trouble removing the hard drive. The instructions say to flip the drive cover over, screw it into the drive & use it as a lever. The only problem is that the longer screws used to affix the cover are too thin to screw into the hard drive and the screws used to screw in the drive itself, are too short.

Anyone else had this problem or am I just being simple? :D

wispa
Posts: 5
Joined: Fri Mar 20, 2009 1:19 pm

Re: Removing the Hard Drive

Post by wispa »

Got it out!

Ended up with me pressing the longer / thinner screws in the drive holes and using brute force to pull the drive out.

irads

Re: Removing the Hard Drive

Post by irads »

You should use the original HDD screws for that. Usually using one screw is sufficient.

Post Reply

Return to “General fit-PC2 questions”