Difference between revisions of "AMT configuration"
From fit-PC wiki
(Created page with "* This guide instructs how to configure Intel AMT. * it applies to models: IPC3 | Airtop2 | Airtop3. '''AMT configuration''' 1. Power on the machine and press CTRL+P at the...") (change visibility) |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
* This guide instructs how to configure Intel AMT. | * This guide instructs how to configure Intel AMT. | ||
| − | * | + | * It applies to models: IPC3 | Airtop2 |
'''AMT configuration''' | '''AMT configuration''' | ||
| − | 1. Power on the machine and press CTRL+P at the splash screen to enter MEBx BIOS. | + | 1. Power on the machine and press CTRL+P at the splash screen to enter MEBx BIOS.<br> |
| − | 2. Enter AMT configuration settings, you'll be prompted to enter a password. | + | 2. Enter AMT configuration settings, you'll be prompted to enter a password.<br> |
| − | 3. Change the default password. The default password is "admin". The new password has the comply with the following policies: | + | 3. Change the default password. The default password is "admin". The new password has the comply with the following policies:<br> |
| − | + | * At least 8 characters | |
| − | + | * At least one digit character (eg. 0, 1, … 9) | |
| − | + | * At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes. | |
| − | + | * At least one lower-case letter (a, b, c, d...) | |
| − | + | * At least one upper case letter (A, B, C, D,...) | |
| − | + | '''Optional:''' The AMT system uses DHCP to configure an IP Address. | |
| − | * | + | * If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings. |
4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured. | 4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured. | ||
| + | |||
| + | [[Category: Airtop3]] | ||
| + | [[Category: Airtop2]] | ||
| + | [[Category: application notes]] | ||
Latest revision as of 09:16, 28 November 2019
- This guide instructs how to configure Intel AMT.
- It applies to models: IPC3 | Airtop2
AMT configuration
1. Power on the machine and press CTRL+P at the splash screen to enter MEBx BIOS.
2. Enter AMT configuration settings, you'll be prompted to enter a password.
3. Change the default password. The default password is "admin". The new password has the comply with the following policies:
- At least 8 characters
- At least one digit character (eg. 0, 1, … 9)
- At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes.
- At least one lower-case letter (a, b, c, d...)
- At least one upper case letter (A, B, C, D,...)
Optional: The AMT system uses DHCP to configure an IP Address.
- If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.
4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured.
