Difference between revisions of "Airtop2 - Enable internal graphics display outputs"
From fit-PC wiki
(Created page with "* This application note applies to Airtop2 configured with discrete GPU. * It provides instructions on how to enable the on-board display outputs. * In the Airtop2 configured...") (change visibility) |
|||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
* This application note applies to Airtop2 configured with discrete GPU. | * This application note applies to Airtop2 configured with discrete GPU. | ||
* It provides instructions on how to enable the on-board display outputs. | * It provides instructions on how to enable the on-board display outputs. | ||
− | * In the Airtop2 configured with discrete GPU, by default the primary display setting is set to [Auto], disabling the on-board display outputs. | + | * In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs. |
* In order to be able to use all display outputs, the iGFX needs to be configured as primary. | * In order to be able to use all display outputs, the iGFX needs to be configured as primary. | ||
* This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX. | * This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX. | ||
Line 9: | Line 9: | ||
# Press ['''DEL'''] on startup to load the BIOS menu. | # Press ['''DEL'''] on startup to load the BIOS menu. | ||
# Enter '''Chipset Menu''' | # Enter '''Chipset Menu''' | ||
− | ## Navigate to --> SA configuration --> Graphics configuration | + | ## Navigate to --> '''SA configuration''' --> '''Graphics configuration''' |
## Pick ['''Primary Display'''] and Choose ['''IGFX''']. | ## Pick ['''Primary Display'''] and Choose ['''IGFX''']. | ||
− | [category: Airtop2] | + | [[category: Airtop2]] |
− | [category: application | + | [[category: application notes]] |
Latest revision as of 07:58, 10 December 2019
- This application note applies to Airtop2 configured with discrete GPU.
- It provides instructions on how to enable the on-board display outputs.
- In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs.
- In order to be able to use all display outputs, the iGFX needs to be configured as primary.
- This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.
Instructions
- Press [DEL] on startup to load the BIOS menu.
- Enter Chipset Menu
- Navigate to --> SA configuration --> Graphics configuration
- Pick [Primary Display] and Choose [IGFX].