Difference between revisions of "Airtop2 - Enable internal graphics display outputs"

From fit-PC wiki
Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 9: Line 9:
 
# Press ['''DEL'''] on startup to load the BIOS menu.
 
# Press ['''DEL'''] on startup to load the BIOS menu.
 
# Enter '''Chipset Menu'''
 
# Enter '''Chipset Menu'''
## Navigate to --> SA configuration --> Graphics configuration
+
## Navigate to --> '''SA configuration''' --> '''Graphics configuration'''
 
## Pick ['''Primary Display'''] and Choose ['''IGFX'''].
 
## Pick ['''Primary Display'''] and Choose ['''IGFX'''].
  
[category: Airtop2]
+
[[category: Airtop2]]
[category: application note]
+
[[category: application notes]]

Latest revision as of 07:58, 10 December 2019

  • This application note applies to Airtop2 configured with discrete GPU.
  • It provides instructions on how to enable the on-board display outputs.
  • In the Airtop2 configured with discrete GPU, by default, the primary display setting is set to [Auto], disabling the on-board display outputs.
  • In order to be able to use all display outputs, the iGFX needs to be configured as primary.
  • This way, the discrete GPU is recognized as a standard PCI device, co-existing with the iGFX.

Instructions

  1. Press [DEL] on startup to load the BIOS menu.
  2. Enter Chipset Menu
    1. Navigate to --> SA configuration --> Graphics configuration
    2. Pick [Primary Display] and Choose [IGFX].