Airtop2 Guide and application notes

From fit-PC wiki
Jump to: navigation, search


  • PDF - Airtop2 (Intel RST) Raid Configuration guide
    • Application note that explains how to configure RAID on Airtop2 using Intel RST
    • Notes: In order to install the Windows Server 2016, you have to load the Intel RST driver before you start the installation.
    • Please, follow the instructions:
1. Browse to the Intel RST Driver download page
2. Download the Intel RST driver package:
3. Unzip the package and copy it to the USB storage device.
4. Start Windows Server 2016 installation on the target Airtop2 unit after you set the RAID.
5. On the Disk Selection page, connect the USB Storage device with Intel RST driver package to the target Airtop2 and click Load Driver.
6. Click Browse and select the folder with Intel RST driver and then clickOK.
7. Select the Intel Chipset RST Premium Controller and click Next.
8. When the system is back to the Disk Selection window, click Load Driver again.
9. Browse to the Intel RST driver package and select the Intel RST Software Components Extension.
10. When the system is back to the Disk Selection window, click Next and the installation will begin.