Difference between revisions of "Airtop3: Installing Linux Mint 19.1"

From fit-PC wiki
Jump to: navigation, search
(Created page with "== Supported devices == * This guide is valid for Airtop3")   (change visibility)
 
(Supported devices)   (change visibility)
Line 1: Line 1:
 
== Supported devices ==
 
== Supported devices ==
 
* This guide is valid for Airtop3
 
* This guide is valid for Airtop3
 +
 +
== Prepare installation media ==
 +
* A USB DVD-ROM drive or a USB Flash drive of at least 2GB should be used as installation media
 +
* Download  [https://www.linuxmint.com/edition.php?id=261 Linux Mint 19.1 "Tessa" - Cinnamon (64-bit)"]
 +
* For installation with a USB DVD-ROM - flash the downloaded image directly onto a DVD
 +
* For installation with a USB Flash drive, please follow [http://community.linuxmint.com/tutorial/view/744 How to install Linux Mint via USB] tutorial
 +
 +
== Base installation of Linux Mint ==
 +
* NOTE: "Running in software rendering mode" message will appear, it's ok, it will disappear after installing graphics drivers.
 +
* Follow the standard Linux Mint installation procedure - choose timezone, partitions, username, password etc.
 +
* Disconnect the installation media and reboot.
 +
* Login using previously selected username and password.
 +
 +
== Kernel upgrade ==
 +
* Install the latest kernel and the latest NVIDIA graphics drivers (optionally)
 +
<pre>
 +
$ sudo apt update
 +
$ sudo apt install linux-generic-hwe-18.04-edge
 +
</pre>
 +
* NOTE: It you have NVIDIA graphics card - do NOT reboot until NVIDIA graphics divers will be installed
 +
 +
== NVIDIA graphics drivers (optionally) ==
 +
<pre>
 +
$ sudo add-apt-repository ppa:graphics-drivers/ppa
 +
$ sudo apt update
 +
$ nvidia_driver=$(apt-cache search "nvidia-driver-[0-9][0-9][0-9]" | grep -o "nvidia-driver-[0-9][0-9][0-9]" | sort | tail -1)
 +
$ sudo apt install $nvidia_driver vdpauinfo mesa-vdpau-drivers vdpau-va-driver --install-recommends
 +
$ sudo reboot
 +
</pre>
 +
 +
* Then run nvidia-smi command, you should see current NVIDIA card status:
 +
<pre>
 +
$ watch -n1 nvidia-smi
 +
Sun May 26 15:57:21 2019     
 +
+-----------------------------------------------------------------------------+
 +
| NVIDIA-SMI 430.14      Driver Version: 430.14      CUDA Version: 10.2    |
 +
|-------------------------------+----------------------+----------------------+
 +
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
 +
| Fan  Temp  Perf  Pwr:Usage/Cap|        Memory-Usage | GPU-Util  Compute M. |
 +
|===============================+======================+======================|
 +
|  0  Quadro RTX 4000    Off  | 00000000:01:00.0  On |                  N/A |
 +
|  0%  43C    P8    1W / 125W |    338MiB /  7979MiB |      0%      Default |
 +
+-------------------------------+----------------------+----------------------+
 +
                                                                             
 +
+-----------------------------------------------------------------------------+
 +
| Processes:                                                      GPU Memory |
 +
|  GPU      PID  Type  Process name                            Usage      |
 +
|=============================================================================|
 +
|    0      1212      G  /usr/lib/xorg/Xorg                          279MiB |
 +
|    0      1669      G  cinnamon                                      58MiB |
 +
+-----------------------------------------------------------------------------+
 +
</pre>
 +
 +
 +
== I3M Panel ==
 +
* Integrated interactive information monitor [[Airtop:I3M | I<sup>3</sup>M]] is a GUI system integrated in the front panel of Airtop
 +
* Download and install the package for Airtop3:
 +
<pre>
 +
$ wget http://www.fit-pc2.com/download/airtop/Airtop2/airtop-fpsvc_systemd.deb
 +
$ sudo dpkg -i airtop-fpsvc_systemd.deb
 +
...
 +
Created symlink /etc/systemd/system/multi-user.target.wants/airtop-fpsvc.service → /lib/systemd/system/airtop-fpsvc.service.
 +
Created symlink /etc/systemd/system/multi-user.target.wants/gpu-thermald.service → /lib/systemd/system/gpu-thermald.service.
 +
</pre>
 +
* Note, the package adds "acpi_enforce_resources=lax" string to the kernel boot line
 +
* Reboot the Airtop after installation
 +
* Now you can navigate through menus between multiple screens of the I<sup>3</sup>M that display system information, temperatures, power consumption and notifications
 +
 +
== MPV media player ==
 +
* Well known free and open-source multimedia player
 +
* Supports GPU accelerated video decoding including CUDA decoding on NVIDIA GPUs and gives excellent playback quality
 +
* Compatible with the most popular video formats
 +
 +
$ sudo apt install mpv
 +
 +
For example, Airtop3 with Quadro RTX 4000 is capable to play 4K UHD using CUDA video decoding without significant system load:
 +
<pre>
 +
$ mpv -fs --hwdec=cuda ~/Videos/jellyfish/jellyfish-140-mbps-4k-uhd-hevc-10bit.mkv
 +
Playing: ~/Videos/jellyfish/jellyfish-140-mbps-4k-uhd-hevc-10bit.mkv
 +
(+) Video --vid=1 (*) (hevc 3840x2160 29.970fps)
 +
(+) Audio --aid=1 (*) (truehd 6ch 48000Hz)
 +
AO: [pulse] 48000Hz 5.1(side) 6ch s32
 +
Using hardware decoding (cuda).
 +
VO: [opengl] 3840x2160 cuda[p010]
 +
AV: 00:00:30 / 00:00:30 (99%) A-V:  0.000 Cache:  0s+0KB
 +
</pre>
 +
 +
Or the same content directly from the youtube:
 +
<pre>
 +
# install fixed youtube-dl package manually
 +
$ wget http://mirrors.kernel.org/ubuntu/pool/universe/y/youtube-dl/youtube-dl_2019.05.20-0ubuntu1_all.deb
 +
$ sudo dpkg -i youtube-dl_2019.05.20-0ubuntu1_all.deb
 +
</pre>
 +
<pre>
 +
$ mpv -fs --hwdec=cuda https://www.youtube.com/watch?v=j4oBg8capW8
 +
Playing: https://www.youtube.com/watch?v=j4oBg8capW8
 +
(+) Video --vid=1 (*) (vp9 3840x2160 29.970fps)
 +
(+) Audio --aid=1 --alang=und (*) 'DASH audio' (aac 2ch 44100Hz) (external)
 +
AO: [pulse] 44100Hz stereo 2ch float
 +
Using hardware decoding (cuda).
 +
VO: [opengl] 3840x2160 cuda[nv12]
 +
AV: 00:00:29 / 00:00:29 (99%) A-V:  0.000 Cache:  0s+0KB
 +
</pre>
 +
 +
[[category:Airtop]]
 +
[[category:Software]]
 +
[[category:Linux]]

Revision as of 13:11, 26 May 2019

Supported devices

  • This guide is valid for Airtop3

Prepare installation media

Base installation of Linux Mint

  • NOTE: "Running in software rendering mode" message will appear, it's ok, it will disappear after installing graphics drivers.
  • Follow the standard Linux Mint installation procedure - choose timezone, partitions, username, password etc.
  • Disconnect the installation media and reboot.
  • Login using previously selected username and password.

Kernel upgrade

  • Install the latest kernel and the latest NVIDIA graphics drivers (optionally)
$ sudo apt update
$ sudo apt install linux-generic-hwe-18.04-edge
  • NOTE: It you have NVIDIA graphics card - do NOT reboot until NVIDIA graphics divers will be installed

NVIDIA graphics drivers (optionally)

$ sudo add-apt-repository ppa:graphics-drivers/ppa
$ sudo apt update
$ nvidia_driver=$(apt-cache search "nvidia-driver-[0-9][0-9][0-9]" | grep -o "nvidia-driver-[0-9][0-9][0-9]" | sort | tail -1)
$ sudo apt install $nvidia_driver vdpauinfo mesa-vdpau-drivers vdpau-va-driver --install-recommends
$ sudo reboot
  • Then run nvidia-smi command, you should see current NVIDIA card status:
$ watch -n1 nvidia-smi
Sun May 26 15:57:21 2019       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.14       Driver Version: 430.14       CUDA Version: 10.2     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  Quadro RTX 4000     Off  | 00000000:01:00.0  On |                  N/A |
|  0%   43C    P8     1W / 125W |    338MiB /  7979MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0      1212      G   /usr/lib/xorg/Xorg                           279MiB |
|    0      1669      G   cinnamon                                      58MiB |
+-----------------------------------------------------------------------------+


I3M Panel

  • Integrated interactive information monitor I3M is a GUI system integrated in the front panel of Airtop
  • Download and install the package for Airtop3:
$ wget http://www.fit-pc2.com/download/airtop/Airtop2/airtop-fpsvc_systemd.deb
$ sudo dpkg -i airtop-fpsvc_systemd.deb
...
Created symlink /etc/systemd/system/multi-user.target.wants/airtop-fpsvc.service → /lib/systemd/system/airtop-fpsvc.service.
Created symlink /etc/systemd/system/multi-user.target.wants/gpu-thermald.service → /lib/systemd/system/gpu-thermald.service.
  • Note, the package adds "acpi_enforce_resources=lax" string to the kernel boot line
  • Reboot the Airtop after installation
  • Now you can navigate through menus between multiple screens of the I3M that display system information, temperatures, power consumption and notifications

MPV media player

  • Well known free and open-source multimedia player
  • Supports GPU accelerated video decoding including CUDA decoding on NVIDIA GPUs and gives excellent playback quality
  • Compatible with the most popular video formats
$ sudo apt install mpv

For example, Airtop3 with Quadro RTX 4000 is capable to play 4K UHD using CUDA video decoding without significant system load:

$ mpv -fs --hwdec=cuda ~/Videos/jellyfish/jellyfish-140-mbps-4k-uhd-hevc-10bit.mkv
Playing: ~/Videos/jellyfish/jellyfish-140-mbps-4k-uhd-hevc-10bit.mkv
 (+) Video --vid=1 (*) (hevc 3840x2160 29.970fps)
 (+) Audio --aid=1 (*) (truehd 6ch 48000Hz)
AO: [pulse] 48000Hz 5.1(side) 6ch s32
Using hardware decoding (cuda).
VO: [opengl] 3840x2160 cuda[p010]
AV: 00:00:30 / 00:00:30 (99%) A-V:  0.000 Cache:  0s+0KB

Or the same content directly from the youtube:

# install fixed youtube-dl package manually
$ wget http://mirrors.kernel.org/ubuntu/pool/universe/y/youtube-dl/youtube-dl_2019.05.20-0ubuntu1_all.deb
$ sudo dpkg -i youtube-dl_2019.05.20-0ubuntu1_all.deb
$ mpv -fs --hwdec=cuda https://www.youtube.com/watch?v=j4oBg8capW8
Playing: https://www.youtube.com/watch?v=j4oBg8capW8
 (+) Video --vid=1 (*) (vp9 3840x2160 29.970fps)
 (+) Audio --aid=1 --alang=und (*) 'DASH audio' (aac 2ch 44100Hz) (external)
AO: [pulse] 44100Hz stereo 2ch float
Using hardware decoding (cuda).
VO: [opengl] 3840x2160 cuda[nv12]
AV: 00:00:29 / 00:00:29 (99%) A-V:  0.000 Cache:  0s+0KB