Difference between revisions of "Airtop3 Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
(Created page with "*TBD")   (change visibility)
 
(1. Screen functionality and connectivity)   (change visibility)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
*TBD
+
== I can't turn on the computer, it doesn't wake up ==
 +
 
 +
* Please use the [[Airtop2 LED behavior description | Airtop3 LED behavior description]] for further diagnostics.
 +
'''LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module'''
 +
 
 +
===1. Check power supply (PSU)===
 +
*Make sure the LED on the power brick is lit.
 +
*Make sure the DC cable is not damaged and connected properly to the machine.
 +
*Make sure the AC cord is properly plugged to both sides (power brick and to the wall).
 +
*Try to plug the DC cable to the alternative DC socket on the Airtop3.
 +
 
 +
===2. Check memory (RAM)===
 +
*Verify diagnostic LED (R) lit <span style="background:Green">Green</span>*.
 +
*If lit in <span style="background:yellow">Yellow</span> it means memory initialization has failed.
 +
*Verify RAM modules seated correctly and firmly in their respective sockets.
 +
*Try to eliminate faulty memory sticks by swapping them with one another.
 +
 
 +
'''*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module'''
 +
 
 +
===3. Check Peripherals (HDD/SSD/USB)===
 +
*Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB devices.
 +
*Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
 +
 
 +
===4. Airtop3 BIOS reset===
 +
*Power down the PC and unplug the power cable.
 +
*Open the service door.
 +
*Remove the disks cartridge.
 +
*Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
 +
*Mount the disks cartridge and close the door.
 +
*Plug the power and power up the PC (either auto-on or pressing power button).
 +
[[File:Airtop2-bios-reset.gif]]
 +
 
 +
    '''LED-B (BIOS)*'''
 +
    This LED is <span style="background:yellow">Yellow</span> after display initialization.
 +
    If BIOS setup menu is needed, the DEL button is functional from the moment the B-LED is <span style="background:yellow">Yellow</span>.
 +
    The B-LED is <span style="background:Green">Green</span> when the OS takes charge of the system.
 +
 +
'''*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module'''
 +
 
 +
== I don't have any display output, there's nothing on the screen ==
 +
 
 +
===1. Screen functionality and connectivity===
 +
* Make sure both power and display cables are connected firmly on both sides.
 +
* Advise the H(Hdmi)/D(Display port) LEDS, <span style="background:Green">Green</span> means the cable is connected to the monitor properly.*
 +
* Make sure the screen is turned On and is functioning.
 +
* The best way to check screen functionality is by connecting to a good known working machine.
 +
 
 +
'''*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module'''
 +
 
 +
===2. Validate memory===
 +
*Display issues on POST are a common symptom of incorrectly assembled or bad Memory DIMMS
 +
*Please refer to [http://fit-pc.com/wiki/index.php/Airtop3_Troubleshooting#2._Check_memory_.28RAM.29 Check memory RAM] to diagnose Memory
 +
 
 +
[[Category:Airtop3]]

Latest revision as of 08:08, 15 September 2019

I can't turn on the computer, it doesn't wake up

LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module

1. Check power supply (PSU)

  • Make sure the LED on the power brick is lit.
  • Make sure the DC cable is not damaged and connected properly to the machine.
  • Make sure the AC cord is properly plugged to both sides (power brick and to the wall).
  • Try to plug the DC cable to the alternative DC socket on the Airtop3.

2. Check memory (RAM)

  • Verify diagnostic LED (R) lit Green*.
  • If lit in Yellow it means memory initialization has failed.
  • Verify RAM modules seated correctly and firmly in their respective sockets.
  • Try to eliminate faulty memory sticks by swapping them with one another.

*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module

3. Check Peripherals (HDD/SSD/USB)

  • Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB devices.
  • Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.

4. Airtop3 BIOS reset

  • Power down the PC and unplug the power cable.
  • Open the service door.
  • Remove the disks cartridge.
  • Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
  • Mount the disks cartridge and close the door.
  • Plug the power and power up the PC (either auto-on or pressing power button).

Airtop2-bios-reset.gif

   LED-B (BIOS)*
   This LED is Yellow after display initialization.
   If BIOS setup menu is needed, the DEL button is functional from the moment the B-LED is Yellow.
   The B-LED is Green when the OS takes charge of the system.

*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module

I don't have any display output, there's nothing on the screen

1. Screen functionality and connectivity

  • Make sure both power and display cables are connected firmly on both sides.
  • Advise the H(Hdmi)/D(Display port) LEDS, Green means the cable is connected to the monitor properly.*
  • Make sure the screen is turned On and is functioning.
  • The best way to check screen functionality is by connecting to a good known working machine.

*LED Diagnostics feature is available only for models configured the with FM-AT3 FACE module

2. Validate memory

  • Display issues on POST are a common symptom of incorrectly assembled or bad Memory DIMMS
  • Please refer to Check memory RAM to diagnose Memory