Difference between revisions of "Fit-PC2 BIOS Update"
From fit-PC wiki
(→To update BIOS) (change visibility) |
|||
Line 17: | Line 17: | ||
fit-PC2 should boot to DOS from the thumb drive. | fit-PC2 should boot to DOS from the thumb drive. | ||
# Type <code>SFlash16.exe <ROM file name></code> | # Type <code>SFlash16.exe <ROM file name></code> | ||
− | # Wait until completion | + | # Wait until completion - a message "Flash memory has been successfully programmed" should appear |
# Reboot | # Reboot |
Revision as of 08:14, 27 July 2009
To prepare bootable USB image on Windows based machine
- Download and extract bios_update.zip
- Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
- Run ImUpdate.exe
- select Target - desired disk (by letter/size).
- select Source image - 128MBDOS.img.
- Press Start Restore to proceed.
- Wait until completion - "Finished" will appear under Messages.
- Take out thumb drive and insert it again. It should now be assigned a drive letter.
- Copy to the root directory on the thumb drive files SFlash16.exe
- Copy to the root directory on the thumb drive the desired ROM file
To update BIOS
- Insert thumb drive and boot. Press F2 during boot to enter CMOS Setup Utility
- Set 1st boot priority to USB KEY
- Save and exit
fit-PC2 should boot to DOS from the thumb drive.
- Type
SFlash16.exe <ROM file name>
- Wait until completion - a message "Flash memory has been successfully programmed" should appear
- Reboot