Fit-PC2 BIOS Update

From fit-PC wiki
Revision as of 08:29, 27 July 2009 by Irads (Talk | contribs) (To prepare bootable USB image on Windows based machine)

Jump to: navigation, search

To prepare bootable USB image on Windows based machine

  1. Download and extract bios_update.zip
  2. Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
  3. Run ImUpdate.exe
    1. select Target - desired disk (by letter/size).
    2. select Source image - 128MBDOS.img.
  4. Press Start Restore to proceed.
  5. Wait until completion - "Finished" will appear under Messages.
  6. Take out thumb drive and insert it again. It should now be assigned a drive letter.
  7. Copy to the root directory on the thumb drive files SFlash16.exe
  8. Download and extract latest BIOS
  9. Copy to the root directory on the thumb drive the xxxxxx.ROM file.

To update BIOS

  1. Insert thumb drive and boot. Press F2 during boot to enter CMOS Setup Utility
  2. Set 1st boot priority to USB KEY
  3. Save and exit

fit-PC2 should boot to DOS from the thumb drive.

  1. Type SFlash16.exe <ROM file name>
  2. Wait until completion - a message "Flash memory has been successfully programmed" should appear
  3. Reboot