Difference between revisions of "FACE Modules:FM-OPLN"

From fit-PC wiki
Jump to: navigation, search
 
(10 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
== FM-OPLN Module ==
 
== FM-OPLN Module ==
FM-OPLN FACE Module equipped with dual SFP+ fiber optics Gbit Ethernet ports, and two additional USB2.0 downstream ports.<br>
+
FM-OPLN FACE Module incorporates dual [https://en.wikipedia.org/wiki/Small_form-factor_pluggable_transceiver SFP+] fiber optics sockets providing LAN 10/100/1000BASE-X Ethernet connectivity, compliant with IEEE 802.3z standard, and two additional USB2.0 downstream ports.<br>
 
Refer to [[Product to FACE Module compatibility | Compatibility Matrix]] for products fit.  
 
Refer to [[Product to FACE Module compatibility | Compatibility Matrix]] for products fit.  
  
 
=== Highlights ===
 
=== Highlights ===
* 2x fiber optics SFP+ GbE LAN 10/100/1000BASE-T compliant with IEEE 802.3/u/ab
+
* 2x fiber optics SFP+ GbE LAN 10/100/1000BASE-X (optic) compliant with IEEE 802.3z
 
* 2x USB2.0 downstream ports, up to 480Mbps half-duplex
 
* 2x USB2.0 downstream ports, up to 480Mbps half-duplex
  
Line 11: Line 11:
  
  
<!--
+
 
 
=== Block Diagram ===  
 
=== Block Diagram ===  
[[File:FM-XTDEU2_4.png]]
+
[[File:FM-OPLN block diagram.png|700px]]
  
  
 
=== Hardware Specifications ===
 
=== Hardware Specifications ===
The following section provides information about FM-XTDEU2/4 main components and features.
+
The following section provides information about FM-OPLN main components and features.
  
'''Realtek RTL8111F GbE Controller'''
+
'''Intel I210IS GbE Controller'''
The Realtek RTL8111F Gigabit Ethernet controller combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, PCI Express bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, the RTL8111F offers high-speed transmission over CAT 5 UTP cable.  
+
Intel Ethernet I210 controller is a single port, compact, low power component that supports GbE designs. The I210 offers a fully-integrated GbE Media Access Control (MAC), Physical Layer (PHY) port and supports PCI Express 2.1 (2.5GT/s mode). The I210 enables 1000BASE-T implementations using an integrated PHY. It can be used for server system configurations such as rack mounted or pedestal servers, in an add-on NIC or LAN on Motherboard (LOM) design. Another possible system configuration is for blade servers as a LOM or mezzanine card. It can also be used in embedded applications such as switch add-on cards and network appliances.
The RTL8111F supports PCI Express 1.1 bus interface for host communications with power management, and is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet. It also supports an auxiliary power auto-detect function, and will auto-configure related bits of the PCI power management registers in PCI configuration space. The RTL8111F features embedded One-Time-Programmable (OTP) memory to replace the external EEPROM.
+
One independent interface is used to connect the I210 port to external devices. The following protocol is supported: MDI (copper) support for standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab).
Advanced Configuration Power management Interface (ACPI) – power management for modern operating systems that are capable of Operating System-directed Power Management (OSPM) – is supported to achieve the most efficient power management possible. In addition to the ACPI feature, remote Wake on LAN is supported in both ACPI and APM (Advanced Power Management) environments.  
+
The RTL8111F is suitable for multiple market segments and emerging applications, such as desktop, mobile, workstation, server, communications platforms and embedded applications.
+
  
 
'''Main Features'''
 
'''Main Features'''
*Integrated 10/100/1000 transceiver
+
* PCIe v2.1 (2.5 GT/s mode) x1, with Switching Voltage Regulator (iSVR)
*Auto-Negotiation with Next Page capability
+
* Integrated Non-Volatile Memory (iNVM)
*Supports PCI Express 1.1
+
* Platform Power Efficiency
*Supports pair swap/polarity/skew correction
+
** IEEE 802.3az Energy Efficient Ethernet (EEE)
*Crossover Detection & Auto-Correction
+
** Proxy: ECMA-393 and Windows logo for proxy offload
*Wake-on-LAN and remote wake-up support
+
* Audio-video bridging
*Supports Full Duplex flow control (IEEE 802.3x)
+
** IEEE 1588/802.1AS precision time synchronization
*Supports jumbo frame to 9K bytes
+
** IEEE 802.1Qav traffic shaper (with software extensions)
*Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
+
* Jumbo frames
*Supports IEEE 802.1P Layer 2 Priority Encoding
+
* Interrupt moderation, VLAN support, IP checksum offload
*Supports IEEE 802.1Q VLAN tagging
+
* RSS and MSI-X to lower CPU utilization in multi-core systems
*Supports IEEE 802.3az-2010 (EEE)
+
* Advanced cable diagnostics, auto MDI-X
*Embedded OTP memory can replace the external EEPROM
+
* ECC – error correcting memory in packet buffers
*Supports power down/link down power saving/PHY disable mode
+
* Four Software Definable Pins (SDPs)
*Built-in switching regulator
+
*Supports Customized LEDs
+
*Supports 1-Lane 2.5Gbps PCI Express Bus
+
*Supports hardware ECC (Error Correction Code) function
+
*Supports hardware CRC (Cyclic Redundancy Check) function
+
*48-pin QFN ‘Green’ package
+
 
+
'''IDT ICS9DB102 1-to-2 Differential Clock Driver'''
+
IDT ICS9DB102 is two output clock buffer for PCIe Gen1 & Gen2 with HCSL current mode differential outputs.
+
Device zero-delay buffer supports PCI Express clocking requirements. The ICS9DB102 is driven by a differential compliant input clock. It attenuates jitter on the input clock and has a selectable PLL Band Width to maximize performance in systems with or without Spread-Spectrum clocking.
+
-->
+
  
 +
'''Pericom PI6C20400 1-to-4 Differential Clock Driver'''
 +
Pericom Semiconductor's PI6C20400 is a high-speed, low-noise differential clock driver/buffer compatible with CML and HCSL differential I/O technology.
 +
The device distributes a differential input clock to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of several static control signals and Host SMBus interface. The device oriented and designed for PCI Express applications.
  
 
=== Schematics ===
 
=== Schematics ===
Line 69: Line 59:
 
=== SW Drivers ===
 
=== SW Drivers ===
 
* [http://fit-pc.com/download/face-modules/fm-opln/sw/fm-opln_windows-drivers.zip Windows 7/8/10 Ethernet driver]
 
* [http://fit-pc.com/download/face-modules/fm-opln/sw/fm-opln_windows-drivers.zip Windows 7/8/10 Ethernet driver]
 +
 +
* [http://fit-pc.com/download/face-modules/fm-1lan/sw/windows-drivers/fm-1lan-win7_ethernet_drivers_2012.12.04.zip Windows 7 Ethernet driver package]
 +
 +
[[Category:Extension boards]]
 +
[[Category:FACE modules]]

Latest revision as of 13:21, 4 September 2018

FM-OPLN Module

FM-OPLN FACE Module incorporates dual SFP+ fiber optics sockets providing LAN 10/100/1000BASE-X Ethernet connectivity, compliant with IEEE 802.3z standard, and two additional USB2.0 downstream ports.
Refer to Compatibility Matrix for products fit.

Highlights

  • 2x fiber optics SFP+ GbE LAN 10/100/1000BASE-X (optic) compliant with IEEE 802.3z
  • 2x USB2.0 downstream ports, up to 480Mbps half-duplex


FM-OPLN.jpg


Block Diagram

FM-OPLN block diagram.png


Hardware Specifications

The following section provides information about FM-OPLN main components and features.

Intel I210IS GbE Controller Intel Ethernet I210 controller is a single port, compact, low power component that supports GbE designs. The I210 offers a fully-integrated GbE Media Access Control (MAC), Physical Layer (PHY) port and supports PCI Express 2.1 (2.5GT/s mode). The I210 enables 1000BASE-T implementations using an integrated PHY. It can be used for server system configurations such as rack mounted or pedestal servers, in an add-on NIC or LAN on Motherboard (LOM) design. Another possible system configuration is for blade servers as a LOM or mezzanine card. It can also be used in embedded applications such as switch add-on cards and network appliances. One independent interface is used to connect the I210 port to external devices. The following protocol is supported: MDI (copper) support for standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and 802.3ab).

Main Features

  • PCIe v2.1 (2.5 GT/s mode) x1, with Switching Voltage Regulator (iSVR)
  • Integrated Non-Volatile Memory (iNVM)
  • Platform Power Efficiency
    • IEEE 802.3az Energy Efficient Ethernet (EEE)
    • Proxy: ECMA-393 and Windows logo for proxy offload
  • Audio-video bridging
    • IEEE 1588/802.1AS precision time synchronization
    • IEEE 802.1Qav traffic shaper (with software extensions)
  • Jumbo frames
  • Interrupt moderation, VLAN support, IP checksum offload
  • RSS and MSI-X to lower CPU utilization in multi-core systems
  • Advanced cable diagnostics, auto MDI-X
  • ECC – error correcting memory in packet buffers
  • Four Software Definable Pins (SDPs)

Pericom PI6C20400 1-to-4 Differential Clock Driver Pericom Semiconductor's PI6C20400 is a high-speed, low-noise differential clock driver/buffer compatible with CML and HCSL differential I/O technology. The device distributes a differential input clock to four differential pairs of clock outputs either with or without PLL. The clock outputs are controlled by input selection of several static control signals and Host SMBus interface. The device oriented and designed for PCI Express applications.

Schematics

Layout

Mechanical

Assembly


SW Drivers