Difference between revisions of "FACE Modules:FM-SER"

From fit-PC wiki
Jump to: navigation, search
Line 1: Line 1:
 
== FM-SER Module ==
 
== FM-SER Module ==
 +
FM-SER FACE Module provide various serial connectivity solution and compatible with several Compulab systems. Refer to [[Product to FACE Module compatibility | Compatibility Matrix]] for products fit.
 +
 +
=== Highlights ===
 +
* High performance UARTS
 +
* Asynchronous baud rates up to 15Mbps
 +
* 128-byte deep TX/RX FIFOs
 +
* Advanced FIFO fill management
 +
* RS232, RS485, RS422 operation
 +
* Programmable RS485 turn-around delay
 +
* 450 through 950 software compatibility
 +
* Two independent CAN bus controllers implement CAN V2.0B at rate of up to 1Mbps each
 +
* Isolated PHY with rated isolation voltage of 2.5 kV RMS
 +
 +
=== Block Diagram ===
 +
[[File:FM-SER.png]]
 +
 +
 
=== Schematics ===
 
=== Schematics ===
 
* [http://fit-pc.com/download/face-modules/fm-ser/hw/rev1.1/FM-SER_REV1.1_Schematics.zip FM-SER schematics files]
 
* [http://fit-pc.com/download/face-modules/fm-ser/hw/rev1.1/FM-SER_REV1.1_Schematics.zip FM-SER schematics files]

Revision as of 11:11, 8 September 2015

FM-SER Module

FM-SER FACE Module provide various serial connectivity solution and compatible with several Compulab systems. Refer to Compatibility Matrix for products fit.

Highlights

  • High performance UARTS
  • Asynchronous baud rates up to 15Mbps
  • 128-byte deep TX/RX FIFOs
  • Advanced FIFO fill management
  • RS232, RS485, RS422 operation
  • Programmable RS485 turn-around delay
  • 450 through 950 software compatibility
  • Two independent CAN bus controllers implement CAN V2.0B at rate of up to 1Mbps each
  • Isolated PHY with rated isolation voltage of 2.5 kV RMS

Block Diagram

FM-SER.png


Schematics

Layout

Mechanics

Assembly


SW Drivers