Difference between revisions of "FACE Modules:FM-VC"

From fit-PC wiki
Jump to: navigation, search
(→‎SW Drivers)   (change visibility)
Line 1: Line 1:
 
== FM-VC Module ==
 
== FM-VC Module ==
 +
FM-VC FACE Module provide the ability for Video and Audio real and non-real time capture from low cost analog video sensors. Features A/V sampling, video, image processing and motion detection algorithms. In addition to application specific capabilities FM-VC offers several general purpose connectivity options as dual USB2.0 downstream ports and serial port supporting either single ended RS232 or differential mode RS485/RS422 operation.<br>
 +
FM-VC FACE Module designed for surveillance, homeland security and any other video analytic system.<br>
 +
 +
Refer to [[Product to FACE Module compatibility | Compatibility Matrix]] for products fit.
 +
 +
=== Highlights ===
 +
* 8x Real time capture Composite Analog Video NTSC/PAL/SECAM channels
 +
* 16x Non-real time capture Composite Analog Video NTSC/PAL/SECAM channels
 +
* 8x Real time capture Analog Audio channels
 +
* 2x DB15 female connectors for AV capture
 +
* 2x USB2.0 downstream ports, up to 480Mbps half-duplex
 +
* 1x Serial port supporting RS232/RS422/RS488 communication via RJ11
 +
 +
=== Block Diagram ===
 +
[[File:FM-VC.png]]
 +
 +
 +
=== Hardware Specifications ===
 +
The following section provides information about FM-VC main components and features.
 +
 +
'''Intersil TW6869 Video Decoder'''
 +
The  TW6869  is  a  highly  integrated  solution  that supports  multi-channel  video  and  audio  capture  via PCI Express  x1  interface  for  PC  DVR  system  and  video analytic  application.  It  contains  high  quality  eight channel  NTSC/PAL/SECAM  video  decoders  that convert  analog  composite  video  signal  to  digital component YCbCr data. Adaptive 4H comb filter for separating luminance and chrominance to reduce cross noise artifacts.<br>
 +
TW6869  contains  a  high  performance  proprietary DMA  controller  that  fully  optimizes  the  utilization  of PCI Express  x1  bandwidth  and  enables  it  to  transfer  video and audio data at  a  high throughput rate that closely approaches  the  theoretical  limit  of  PCI Express x1  interface. TW6869 is able to simultaneously decode and transfer 8 real time video streams, or up to 16 channel non-real time video streams in FM-VC application, plus 8 real time audio channel.
 +
 +
'''Video Decoder Features'''
 +
* Accepts all NTSC(M/N/4.43) / PAL(B/D/G/H/I/K/L/M/N/60) standards with auto detection
 +
* Integrated eight video analog anti-alias filters and 10-bit CMOS ADCs
 +
* Color Transient Improvement, White peak AGC control
 +
* Programmable hue, saturation, contrast, brightness and sharpness
 +
* High quality proprietary fast video locking system for non-real-time application
 +
* High performance adaptive 4H comb filters for all NTSC and PAL standards
 +
 +
'''Audio Codec Features'''
 +
* Integrated eight audio ADCs
 +
* 8/16 bit audio word length
 +
* Sample audio with 8/16/32/44.1/48kHz
 +
 +
'''DMA Controller'''
 +
* Highly-efficient DMA design can support up to 8 real time D1 video and 8 real time audio
 +
Channels, or up to 32 non-real- time video with optimization of full PCIe x1 bandwidth
 +
* Multiple digital video format outputs: UYVY/Y422, YUYV/YUY2, IYU1/Y411, Y41P, YUV420, RGB555 and RGB565
 +
* Integrated internal video and audio generator simplifies system test and development
 +
* Built-in motion detection engine for each video channel
 +
 +
'''Host Interface'''
 +
* PCI Express Base Specification 1.1 and 2.0 Compliant
 +
 +
 +
'''SMSC SIO1007 Super-IO Controller'''
 +
The SMSC SIO1007 is PC 99 and ACPI 1.0 compliant Super I/O Controller. The SIO1007 implements the LPC interface with the LPC PortSwitch interface. The LPC PortSwitch interface is a hot switchable external docking LPC interface. It also features a full 16bit internally decoded address bus, a Serial IRQ interface with PCI clock support, relocatable configuration ports and three DMA channel options. The part also includes 16 GPIO pins.
 +
The SIO1007 incorporates one complete 8-pin UART. In addition SIO1007 provides a second UART to support a serial Infrared interface that complies with IrDA v1.2 (Fast IR) and several other popular IR formats.
 +
'''Main Features'''
 +
* One full function Serial port
 +
* High Speed UART with Send/Receive 16-Byte FIFOs
 +
* Support 230k and 460k Baud rates
 +
* Programmable baud rate generator
 +
* Modem control circuit
 +
* IR communication controller
 +
* LPC bus Host interface
 +
* LPC PortSwitch interface
 +
* Two IRQ input pins
 +
* PC99a and ACPI 1.0 Compliant
 +
* Intelligent Auto Power Management
 +
* 16x GPIOs
 +
 +
'''IDT ICS9DB102 1-to-2 Differential Clock Driver'''
 +
IDT ICS9DB102 is two output clock buffer for PCIe Gen1 & Gen2 with HCSL current mode differential outputs.
 +
Device zero-delay buffer supports PCI Express clocking requirements. The ICS9DB102 is driven by a differential compliant input clock. It attenuates jitter on the input clock and has a selectable PLL Band Width to maximize performance in systems with or without Spread-Spectrum clocking.
 +
 +
'''MAX3221 RS232 Transceiver'''
 +
* Single-channel RS232 serial protocol transceiver
 +
* Implementation RS232 PHY serial protocol port
 +
* Data rate of 250kbps or more
 +
* Low power operation and auto-shutdown
 +
 +
'''ADM3491 RS422/RS485 Transceiver'''
 +
* Single-channel RS422/RS485 serial protocol transceiver
 +
* Implements RS422/RS485 PHY serial protocol
 +
* Supports full-duplex RS485 protocol with data rate of up to 10Mbps
 +
* Low power operation and auto-shutdown
 +
 +
 +
 
=== Schematics ===
 
=== Schematics ===
 
* [http://fit-pc.com/download/face-modules/fm-vc/hw/rev1.0/FM-VC_REV1.0_Schematics.zip FM-VC schematics files]
 
* [http://fit-pc.com/download/face-modules/fm-vc/hw/rev1.0/FM-VC_REV1.0_Schematics.zip FM-VC schematics files]

Revision as of 14:13, 8 September 2015

FM-VC Module

FM-VC FACE Module provide the ability for Video and Audio real and non-real time capture from low cost analog video sensors. Features A/V sampling, video, image processing and motion detection algorithms. In addition to application specific capabilities FM-VC offers several general purpose connectivity options as dual USB2.0 downstream ports and serial port supporting either single ended RS232 or differential mode RS485/RS422 operation.
FM-VC FACE Module designed for surveillance, homeland security and any other video analytic system.

Refer to Compatibility Matrix for products fit.

Highlights

  • 8x Real time capture Composite Analog Video NTSC/PAL/SECAM channels
  • 16x Non-real time capture Composite Analog Video NTSC/PAL/SECAM channels
  • 8x Real time capture Analog Audio channels
  • 2x DB15 female connectors for AV capture
  • 2x USB2.0 downstream ports, up to 480Mbps half-duplex
  • 1x Serial port supporting RS232/RS422/RS488 communication via RJ11

Block Diagram

FM-VC.png


Hardware Specifications

The following section provides information about FM-VC main components and features.

Intersil TW6869 Video Decoder The TW6869 is a highly integrated solution that supports multi-channel video and audio capture via PCI Express x1 interface for PC DVR system and video analytic application. It contains high quality eight channel NTSC/PAL/SECAM video decoders that convert analog composite video signal to digital component YCbCr data. Adaptive 4H comb filter for separating luminance and chrominance to reduce cross noise artifacts.
TW6869 contains a high performance proprietary DMA controller that fully optimizes the utilization of PCI Express x1 bandwidth and enables it to transfer video and audio data at a high throughput rate that closely approaches the theoretical limit of PCI Express x1 interface. TW6869 is able to simultaneously decode and transfer 8 real time video streams, or up to 16 channel non-real time video streams in FM-VC application, plus 8 real time audio channel.

Video Decoder Features

  • Accepts all NTSC(M/N/4.43) / PAL(B/D/G/H/I/K/L/M/N/60) standards with auto detection
  • Integrated eight video analog anti-alias filters and 10-bit CMOS ADCs
  • Color Transient Improvement, White peak AGC control
  • Programmable hue, saturation, contrast, brightness and sharpness
  • High quality proprietary fast video locking system for non-real-time application
  • High performance adaptive 4H comb filters for all NTSC and PAL standards

Audio Codec Features

  • Integrated eight audio ADCs
  • 8/16 bit audio word length
  • Sample audio with 8/16/32/44.1/48kHz

DMA Controller

  • Highly-efficient DMA design can support up to 8 real time D1 video and 8 real time audio

Channels, or up to 32 non-real- time video with optimization of full PCIe x1 bandwidth

  • Multiple digital video format outputs: UYVY/Y422, YUYV/YUY2, IYU1/Y411, Y41P, YUV420, RGB555 and RGB565
  • Integrated internal video and audio generator simplifies system test and development
  • Built-in motion detection engine for each video channel

Host Interface

  • PCI Express Base Specification 1.1 and 2.0 Compliant


SMSC SIO1007 Super-IO Controller The SMSC SIO1007 is PC 99 and ACPI 1.0 compliant Super I/O Controller. The SIO1007 implements the LPC interface with the LPC PortSwitch interface. The LPC PortSwitch interface is a hot switchable external docking LPC interface. It also features a full 16bit internally decoded address bus, a Serial IRQ interface with PCI clock support, relocatable configuration ports and three DMA channel options. The part also includes 16 GPIO pins. The SIO1007 incorporates one complete 8-pin UART. In addition SIO1007 provides a second UART to support a serial Infrared interface that complies with IrDA v1.2 (Fast IR) and several other popular IR formats. Main Features

  • One full function Serial port
  • High Speed UART with Send/Receive 16-Byte FIFOs
  • Support 230k and 460k Baud rates
  • Programmable baud rate generator
  • Modem control circuit
  • IR communication controller
  • LPC bus Host interface
  • LPC PortSwitch interface
  • Two IRQ input pins
  • PC99a and ACPI 1.0 Compliant
  • Intelligent Auto Power Management
  • 16x GPIOs

IDT ICS9DB102 1-to-2 Differential Clock Driver IDT ICS9DB102 is two output clock buffer for PCIe Gen1 & Gen2 with HCSL current mode differential outputs. Device zero-delay buffer supports PCI Express clocking requirements. The ICS9DB102 is driven by a differential compliant input clock. It attenuates jitter on the input clock and has a selectable PLL Band Width to maximize performance in systems with or without Spread-Spectrum clocking.

MAX3221 RS232 Transceiver

  • Single-channel RS232 serial protocol transceiver
  • Implementation RS232 PHY serial protocol port
  • Data rate of 250kbps or more
  • Low power operation and auto-shutdown

ADM3491 RS422/RS485 Transceiver

  • Single-channel RS422/RS485 serial protocol transceiver
  • Implements RS422/RS485 PHY serial protocol
  • Supports full-duplex RS485 protocol with data rate of up to 10Mbps
  • Low power operation and auto-shutdown


Schematics

Layout

Mechanics

Assembly

Operation Instructions

SW Drivers

  • Note: FM-VC is not operational with 64-bit versions of Windows
Retrieved from "https://fit-pc.com/wiki/index.php?title=FACE_Modules:FM-VC&oldid=3101"