Difference between revisions of "FAQ:Intense PC"

From fit-PC wiki
Jump to: navigation, search
Line 6: Line 6:
 
Each VBUS pair supplied via onboard power switch with current limit settings of 2.1A, meaning either each VBUS capable sourcing up to 1.05A in case two bus powered devices connected, or sourcing 2.1A in case single bus powered device connected.
 
Each VBUS pair supplied via onboard power switch with current limit settings of 2.1A, meaning either each VBUS capable sourcing up to 1.05A in case two bus powered devices connected, or sourcing 2.1A in case single bus powered device connected.
  
 +
=== USB ports power behavior ===
 +
Intense PC USB port power behavior:
 +
# FACE Module ports – USB power always on (S0, S3, S4, S5).
 +
# Motherboard back panel ports – USB power on in S0, S3 but off in S4, S5.
 +
 +
S0 – active<br>
 +
S3 – sleep<br>
 +
S4 – hibernate<br>
 +
S5 – shutdown<br>
  
 
== Software ==
 
== Software ==

Revision as of 07:35, 22 April 2015

Hardware

Which power supplies can power the Intense PC?

Intense PC bundle comes with external AC/DC wall power supply, providing unregulated 10–15Vdc input voltage range, 12Vdc nominal. However, any power supply able to supply ~60W from 12Vdc source will be fine.

What are power capabilities of Intense PC USB ports?

Each VBUS pair supplied via onboard power switch with current limit settings of 2.1A, meaning either each VBUS capable sourcing up to 1.05A in case two bus powered devices connected, or sourcing 2.1A in case single bus powered device connected.

USB ports power behavior

Intense PC USB port power behavior:

  1. FACE Module ports – USB power always on (S0, S3, S4, S5).
  2. Motherboard back panel ports – USB power on in S0, S3 but off in S4, S5.

S0 – active
S3 – sleep
S4 – hibernate
S5 – shutdown

Software

Links