Difference between revisions of "FM-AT3 FACE Module"

From fit-PC wiki
Jump to: navigation, search
(Mechanical)   (change visibility)
 
(5 intermediate revisions by the same user not shown)
Line 4: Line 4:
 
** HDA Audio codec: Realtek ALC1150
 
** HDA Audio codec: Realtek ALC1150
 
** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
 
** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
** SD card hub Microchip USB2642
+
** micro-SD card hub Microchip USB2642
 +
** uSIM slot
  
 
* Interfaces:
 
* Interfaces:
Line 14: Line 15:
 
** full-size mini PCIe
 
** full-size mini PCIe
 
** micro-SD card slot
 
** micro-SD card slot
** LED indicators: BIOS/OS, RAM, HDMI, DP<br><!--
+
** uSIM slot
[[File:fc-scg-top.jpg|200px]]
+
** LED indicators: BIOS/OS, RAM, HDMI, DP<br>
[[File:fc-scg-bottom.jpg|200px|middle]]
+
<br>
 +
[[File:FM-AT3 FACE MODUL BACK.jpeg|700px]]<br>
 +
[[File:FM-AT3 FACE MODULE FRONT.jpg|700px]]
 +
=== Mechanical ===
 +
* [https://fit-iot.s3.amazonaws.com/download/face-modules/FM-AT2C/hw/DXF/FM-AT2C-v1.1-DXF.zip FM-AT2C DXF file]
 +
* [https://fit-iot.s3.amazonaws.com/download/face-modules/FM-AT2C/hw/X_T-STEP/FM-AT2C-v1.1.STEP FM-AT2C 3D STP file]
 +
* [https://fit-iot.s3.amazonaws.com/download/face-modules/FM-AT2C/hw/X_T-STEP/FM-AT2C-v1.1.x_t FM-AT2C 3D x_t file]
  
===Instructions===
 
* [[Fitlet2 FC-SCG installation instructions]]
 
  
===Hardware===
+
Back to [[Fit-PC_Product_Line:FACE_Modules]]
* [[FSCG RS232/RS485 pinout table]]
+
  
===Application notes===
 
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
 
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
 
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
 
  
Note: GPIO and CANbus cannot work simultaneously
+
[[Category:Extension boards]]
 
+
[[Category:FACE modules]]
===Production files===
+
 
+
*Schematics
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
+
 
+
*Assembly
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
+
 
+
*Layout
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
+
 
+
Mechanical
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
+
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
+
 
+
*3D 360<sup>0</sup> model
+
**[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] -->
+
 
+
Back to [[Fitlet2 FACET Cards]]
+
 
+
[[category:fitlet2]]
+
[[category:Extension boards]]
+

Latest revision as of 14:07, 24 December 2020

FM-AT3 FACE MODULE (FM-AT2C)

  • Main Features:
    • HDA Audio codec: Realtek ALC1150
    • Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
    • micro-SD card hub Microchip USB2642
    • uSIM slot
  • Interfaces:
    • 3.5mm analog mic. in
    • 3.5mm analog audio out
    • USB 3.1 gen. 2 on USB Type-C connector
    • USB 3.1 gen. 2 on USB Type-A connector
    • USB 3.1 gen. 1 on USB Type-A connector
    • full-size mini PCIe
    • micro-SD card slot
    • uSIM slot
    • LED indicators: BIOS/OS, RAM, HDMI, DP


FM-AT3 FACE MODUL BACK.jpeg
FM-AT3 FACE MODULE FRONT.jpg

Mechanical


Back to Fit-PC_Product_Line:FACE_Modules