Difference between revisions of "FM-AT3 FACE Module"
From fit-PC wiki
m (Andreym moved page FM-AT3 FACET Card to FM-AT3 FACE Module: Wrong name) (change visibility) |
|||
| Line 1: | Line 1: | ||
| + | ==FM-AT3 FACE MODULE (FM-AT2C)== | ||
| + | * Main Features: | ||
| + | ** HDA Audio codec: Realtek ALC1150 | ||
| + | ** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142 | ||
| + | ** SD card hub Microchip USB2642 | ||
| + | |||
| + | * Interfaces: | ||
| + | ** 3.5mm analog mic. in | ||
| + | ** 3.5mm analog audio out | ||
| + | ** USB 3.1 gen. 2 on USB Type-C connector | ||
| + | ** USB 3.1 gen. 2 on USB Type-A connector | ||
| + | ** USB 3.1 gen. 1 on USB Type-A connector | ||
| + | ** full-size mini PCIe | ||
| + | ** micro-SD card slot | ||
| + | ** LED indicators: BIOS/OS, RAM, HDMI, DP<br><!-- | ||
| + | [[File:fc-scg-top.jpg|200px]] | ||
| + | [[File:fc-scg-bottom.jpg|200px|middle]] | ||
| + | |||
| + | ===Instructions=== | ||
| + | * [[Fitlet2 FC-SCG installation instructions]] | ||
| + | |||
| + | ===Hardware=== | ||
| + | * [[FSCG RS232/RS485 pinout table]] | ||
| + | |||
| + | ===Application notes=== | ||
| + | * [[Application note - CANbus on fitlet2 with FC-SCG running Linux]] | ||
| + | * [[Application note - GPIO on fitlet2 with FC-SCG running Linux]] | ||
| + | Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender | ||
| + | |||
| + | Note: GPIO and CANbus cannot work simultaneously | ||
| + | |||
| + | ===Production files=== | ||
| + | |||
| + | *Schematics | ||
| + | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files] | ||
| + | |||
| + | *Assembly | ||
| + | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files] | ||
| + | |||
| + | *Layout | ||
| + | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files] | ||
| + | |||
| + | Mechanical | ||
| + | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side] | ||
| + | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side] | ||
| + | |||
| + | *3D 360<sup>0</sup> model | ||
| + | **[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] --> | ||
| + | |||
| + | Back to [[Fitlet2 FACET Cards]] | ||
| + | |||
| + | [[category:fitlet2]] | ||
| + | [[category:Extension boards]] | ||
Revision as of 09:58, 23 December 2020
FM-AT3 FACE MODULE (FM-AT2C)
- Main Features:
- HDA Audio codec: Realtek ALC1150
- Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
- SD card hub Microchip USB2642
- Interfaces:
- 3.5mm analog mic. in
- 3.5mm analog audio out
- USB 3.1 gen. 2 on USB Type-C connector
- USB 3.1 gen. 2 on USB Type-A connector
- USB 3.1 gen. 1 on USB Type-A connector
- full-size mini PCIe
- micro-SD card slot
- LED indicators: BIOS/OS, RAM, HDMI, DP
Back to Fitlet2 FACET Cards
