Difference between revisions of "Fit-PC2i Troubleshooting"

From fit-PC wiki
Jump to: navigation, search
Line 1: Line 1:
 
1. Fit-PC2i BIOS reset:
 
1. Fit-PC2i BIOS reset:
 
::a. Power down the PC and unplug the power cable.
 
::a. Power down the PC and unplug the power cable.
::b. Open the top cover gently and remove it (with the storage).
+
::b. Open the service door and remove the storage.
::c. Reset the BIOS by shorting for 3 seconds two test points of J4B2 located in corner (near one memory chip and power button).
+
::c. Open the top cover gently after removing 4 bolts.
::d. Close the cover and the storage with the service door.
+
::d. Reset the BIOS by shorting two test points of J4B2 for 3 seconds, located in the corner (near one memory chip and power button).
::e. Plug the power and power up the PC.
+
::e. Close the cover, return the storage and the service door.
 +
::f. Plug the power and power up the PC.
  
  

Revision as of 14:17, 31 July 2014

1. Fit-PC2i BIOS reset:

a. Power down the PC and unplug the power cable.
b. Open the service door and remove the storage.
c. Open the top cover gently after removing 4 bolts.
d. Reset the BIOS by shorting two test points of J4B2 for 3 seconds, located in the corner (near one memory chip and power button).
e. Close the cover, return the storage and the service door.
f. Plug the power and power up the PC.


Fit-PC2i BIOS reset.JPG


2. Try to answer the following questions:

a. Are you able to power up without storage?
b. What type of storage being used in terms of RPM (in case of HDD)?
Note that 7200rpm drives are not recommended due to lower power nature of the PC, as such drives used to overload the machine. 5400rpm drives at maximum must be used.


3. RMA procedure