Difference between revisions of "Fit-PC3 BIOS ROM Files"

From fit-PC wiki
Jump to: navigation, search
(09-Jan-2011)   (change visibility)
Line 1: Line 1:
 +
*SCT_2.1.0.333_5
 +
**Ethernet controller bug fixed - did not return from sleep mode.
 +
**SATA 4,5 (eSATA) detection bug fixed - eSATA devices were not visible in BIOS.
 +
**UART1 bug fixed - did not work on T44R.
 +
 +
*SCT_2.1.0.333_6
 +
**BIOS Setup customization
 +
 +
*SCT_2.1.0.333_7
 +
**Numonyx M25P16 SPI Flash support is added
 +
 +
*SCT_2.1.0.333_8
 +
**NB PCIe are enabled (Extension P0 and P1 bug fix)
 +
**Numonyx M25PX16 SPI Flash support is added
 +
**Aggressive CPU power management (CPU noise reduction) is implemented
 +
 +
*SCT 2.1.0.333_9
 +
**PXE boot support for SBC Realtek network controller is added.
 +
**Full-size mPCIe selection (mSATA/PCIe) is added
 +
**UART1 selection (Serial/IR) is added
 +
**Video output D1 selection (HDMI/Display Port) is added
 +
**BIOS Setup customization was made
 +
 +
*SCT 2.1.0.333_10
 +
**Watchdog support is added
 +
 +
*SCT 2.1.0.333_11
 +
**Separate flashing mechanism for SPI Flash Numonyx M25P16 is added
 +
**Memory Initialization bug fixed
 +
 +
**SBC_2.1.0.333_12
 +
**SATA 3 support is added
 +
**DMI strings support is added
 +
**Boot priorities are changed
 +
 +
 
* [http://www.fit-pc2.com/download/fit-PC3/BIOS/bios-fp3.bin Download]
 
* [http://www.fit-pc2.com/download/fit-PC3/BIOS/bios-fp3.bin Download]

Revision as of 09:59, 19 September 2012

  • SCT_2.1.0.333_5
    • Ethernet controller bug fixed - did not return from sleep mode.
    • SATA 4,5 (eSATA) detection bug fixed - eSATA devices were not visible in BIOS.
    • UART1 bug fixed - did not work on T44R.
  • SCT_2.1.0.333_6
    • BIOS Setup customization
  • SCT_2.1.0.333_7
    • Numonyx M25P16 SPI Flash support is added
  • SCT_2.1.0.333_8
    • NB PCIe are enabled (Extension P0 and P1 bug fix)
    • Numonyx M25PX16 SPI Flash support is added
    • Aggressive CPU power management (CPU noise reduction) is implemented
  • SCT 2.1.0.333_9
    • PXE boot support for SBC Realtek network controller is added.
    • Full-size mPCIe selection (mSATA/PCIe) is added
    • UART1 selection (Serial/IR) is added
    • Video output D1 selection (HDMI/Display Port) is added
    • BIOS Setup customization was made
  • SCT 2.1.0.333_10
    • Watchdog support is added
  • SCT 2.1.0.333_11
    • Separate flashing mechanism for SPI Flash Numonyx M25P16 is added
    • Memory Initialization bug fixed
    • SBC_2.1.0.333_12
    • SATA 3 support is added
    • DMI strings support is added
    • Boot priorities are changed