Difference between revisions of "Fit-PC3 BIOS ROM Files"
From fit-PC wiki
(→09-Jan-2011) (change visibility) |
|||
Line 1: | Line 1: | ||
+ | *SCT_2.1.0.333_5 | ||
+ | **Ethernet controller bug fixed - did not return from sleep mode. | ||
+ | **SATA 4,5 (eSATA) detection bug fixed - eSATA devices were not visible in BIOS. | ||
+ | **UART1 bug fixed - did not work on T44R. | ||
+ | |||
+ | *SCT_2.1.0.333_6 | ||
+ | **BIOS Setup customization | ||
+ | |||
+ | *SCT_2.1.0.333_7 | ||
+ | **Numonyx M25P16 SPI Flash support is added | ||
+ | |||
+ | *SCT_2.1.0.333_8 | ||
+ | **NB PCIe are enabled (Extension P0 and P1 bug fix) | ||
+ | **Numonyx M25PX16 SPI Flash support is added | ||
+ | **Aggressive CPU power management (CPU noise reduction) is implemented | ||
+ | |||
+ | *SCT 2.1.0.333_9 | ||
+ | **PXE boot support for SBC Realtek network controller is added. | ||
+ | **Full-size mPCIe selection (mSATA/PCIe) is added | ||
+ | **UART1 selection (Serial/IR) is added | ||
+ | **Video output D1 selection (HDMI/Display Port) is added | ||
+ | **BIOS Setup customization was made | ||
+ | |||
+ | *SCT 2.1.0.333_10 | ||
+ | **Watchdog support is added | ||
+ | |||
+ | *SCT 2.1.0.333_11 | ||
+ | **Separate flashing mechanism for SPI Flash Numonyx M25P16 is added | ||
+ | **Memory Initialization bug fixed | ||
+ | |||
+ | **SBC_2.1.0.333_12 | ||
+ | **SATA 3 support is added | ||
+ | **DMI strings support is added | ||
+ | **Boot priorities are changed | ||
+ | |||
+ | |||
* [http://www.fit-pc2.com/download/fit-PC3/BIOS/bios-fp3.bin Download] | * [http://www.fit-pc2.com/download/fit-PC3/BIOS/bios-fp3.bin Download] |
Revision as of 09:59, 19 September 2012
- SCT_2.1.0.333_5
- Ethernet controller bug fixed - did not return from sleep mode.
- SATA 4,5 (eSATA) detection bug fixed - eSATA devices were not visible in BIOS.
- UART1 bug fixed - did not work on T44R.
- SCT_2.1.0.333_6
- BIOS Setup customization
- SCT_2.1.0.333_7
- Numonyx M25P16 SPI Flash support is added
- SCT_2.1.0.333_8
- NB PCIe are enabled (Extension P0 and P1 bug fix)
- Numonyx M25PX16 SPI Flash support is added
- Aggressive CPU power management (CPU noise reduction) is implemented
- SCT 2.1.0.333_9
- PXE boot support for SBC Realtek network controller is added.
- Full-size mPCIe selection (mSATA/PCIe) is added
- UART1 selection (Serial/IR) is added
- Video output D1 selection (HDMI/Display Port) is added
- BIOS Setup customization was made
- SCT 2.1.0.333_10
- Watchdog support is added
- SCT 2.1.0.333_11
- Separate flashing mechanism for SPI Flash Numonyx M25P16 is added
- Memory Initialization bug fixed
- SBC_2.1.0.333_12
- SATA 3 support is added
- DMI strings support is added
- Boot priorities are changed