Difference between revisions of "Fit-PC3 BIOS Update"

From fit-PC wiki
Jump to: navigation, search
(Preparing a bootable USB flash device on a Windows PC)   (change visibility)
(Preparing a bootable USB flash device on a Windows PC)   (change visibility)
Line 6: Line 6:
 
# Run the downloaded Rufus application.  
 
# Run the downloaded Rufus application.  
 
# Select the target disk in the "Device" drop-down list.  
 
# Select the target disk in the "Device" drop-down list.  
# Select the “Create a bootable disk using” checkbox and choose the “FreeDOS” in the drop-down list.  
+
# Select the '''“Create a bootable disk using”''' checkbox and choose the '''“FreeDOS”''' in the drop-down list.  
# Press "Start" button to proceed.  
+
# Press '''"Start"''' button to proceed.  
 
# Wait until completion.
 
# Wait until completion.
 
# Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
 
# Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.

Revision as of 08:33, 22 October 2017

Follow us on Google+ for software and BIOS updates

Preparing a bootable USB flash device on a Windows PC

  1. Download the Rufus application.
  2. Connect the USB flash device to your host PC (ensure that you don't have any other USB mass storage devices connected).
  3. Run the downloaded Rufus application.
  4. Select the target disk in the "Device" drop-down list.
  5. Select the “Create a bootable disk using” checkbox and choose the “FreeDOS” in the drop-down list.
  6. Press "Start" button to proceed.
  7. Wait until completion.
  8. Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
  9. Download and extract Bios Updater Package.
  10. Copy the extracted files to the root directory on the prepared USB flash device
  11. Download the latest BIOS binary file for fit-PC3 or fit-PC3i.
  12. Copy the fp3.bin or fp3i.bin file to the root directory on the prepared USB flash device.

Updating BIOS

  1. Connect the prepared USB flash device to the fit-PC3 and boot (ensure that the UFD should be connected to the USB2 connector only).
  2. Press F2 during boot to enter BIOS setup utility.
  3. Set 1st boot priority to USB HDD.
  4. Save and exit.
  5. The fit-PC3 should boot to DOS from the USB device.
  6. Type flash3 for fit-PC3 or flash3i for fit-PC3i.
  7. Wait until a "BIOS is updated successfully" message appears.
  8. Disconnect the USB device and reboot.


Links