Difference between revisions of "Fit-PC3i BIOS ROM Files"

Revision as of 15:09, 19 October 2014

Note: fit-PC3 requires different BIOS image

SBCFP3I_2.1.0.333_2 2014.01.26
- USB HDD is set as first device in the boot priority
- Bug fixes and stability enhancements

@@ Line 6: / Line 6: @@
 == BIOS Changelog ==
-*SBCFP3I_2.1.0.333_3
+*SBCFP3I_2.1.0.333_3 2014.02.28
 **Bug fixes and stability enhancements
-*SBCFP3I_2.1.0.333_2
+*SBCFP3I_2.1.0.333_2 2014.01.26
 **USB HDD is set as first device in the boot priority
 **Bug fixes and stability enhancements
-*SCT_2.1.0.333_12
-**SATA 3 support is added
-**DMI strings support is added. '''DMI strings can be updated in the fit-PC3 rev. 2.3 only'''
-**Boot priorities are changed
-*SCT_2.1.0.333_11
+*SBCFP3I_2.1.0.333_1 2013.11.26
-**Separate flashing mechanism for SPI Flash Numonyx M25P16 is added
+**Initial release
-**Memory Initialization issue is fixed
-*SCT_2.1.0.333_10
-**Watchdog support is added
-*SCT_2.1.0.333_9
-**PXE boot support for SBC Realtek network controller is added.
-**Full-size mPCIe selection (mSATA/PCIe) is added
-**UART selection (Serial/IR) is added
-**Video output D1 selection (HDMI/Display Port) is added
-**BIOS Setup customization is made
-*SCT_2.1.0.333_8
-**NB PCIe port support is added
-**Numonyx M25PX16 SPI Flash support is added
-**Aggressive CPU power management (CPU noise reduction) is implemented
-*SCT_2.1.0.333_7
-**Numonyx M25P16 SPI Flash support is added
-*SCT_2.1.0.333_6
-**BIOS Setup customization
-*SCT_2.1.0.333_5
-**Ethernet controller issue is fixed
-**SATA 4,5 (eSATA) detection issue is fixed
-**UART issue is fixed