Difference between revisions of "Fit-PC4 Errata Notes"
From fit-PC wiki
Line 1: | Line 1: | ||
== FITPC4ERR001: Power LED == | == FITPC4ERR001: Power LED == | ||
− | * '''Date''': | + | * '''Date''': 28-Apr-2014 |
* '''Symptom''': Power (Logo) LED enabled at all power states (S0, S3, S4 and S5), even during SW shut down | * '''Symptom''': Power (Logo) LED enabled at all power states (S0, S3, S4 and S5), even during SW shut down | ||
* '''Applies to revision(s)''': 1.0 to 1.1 | * '''Applies to revision(s)''': 1.0 to 1.1 | ||
Line 8: | Line 8: | ||
== FITPC4ERR002: Memory organization == | == FITPC4ERR002: Memory organization == | ||
− | * '''Date''': | + | * '''Date''': 22-Jul-2014 |
* '''Symptom''': When single memory module installed on inner slot (P6) it may cause the system not to pass memory initialization | * '''Symptom''': When single memory module installed on inner slot (P6) it may cause the system not to pass memory initialization | ||
* '''Applies to revision(s)''': 1.0 to 1.1 | * '''Applies to revision(s)''': 1.0 to 1.1 |
Revision as of 10:44, 11 October 2015
FITPC4ERR001: Power LED
- Date: 28-Apr-2014
- Symptom: Power (Logo) LED enabled at all power states (S0, S3, S4 and S5), even during SW shut down
- Applies to revision(s): 1.0 to 1.1
- Cause: Incorrect LED connection
- Workaround: Ignore logo LED indications
- Fix: Fixed in revision 1.2
FITPC4ERR002: Memory organization
- Date: 22-Jul-2014
- Symptom: When single memory module installed on inner slot (P6) it may cause the system not to pass memory initialization
- Applies to revision(s): 1.0 to 1.1
- Cause: Incorrect SIM slot pin routing
- Workaround: In case single SO-DIMM to be used, it should populate the slot closer to PCB edge (P7)
- Fix: Populate the slot closer to PCB edge (P7)