Difference between revisions of "Fit-PC4 RTC Battery Erratum"

From fit-PC wiki
Jump to: navigation, search
(fit-PC4 RTC Battery Erratum:)   (change visibility)
(RTC Battery replacement Guide)   (change visibility)
 
(One intermediate revision by one other user not shown)
Line 24: Line 24:
  
 
*[http://fit-iot.com/files/fit-PC4/fit-PC4_RTC_Battery_replacement_guide.pdf fit-PC4 RTC Battery replacement guide]
 
*[http://fit-iot.com/files/fit-PC4/fit-PC4_RTC_Battery_replacement_guide.pdf fit-PC4 RTC Battery replacement guide]
 +
 +
[[category:Errata notes]]
 +
[[category:fit-PC4]]

Latest revision as of 11:58, 6 February 2019

Date: 11/FEB/2018

fit-PC4 RTC Battery Erratum:

fit-PC4 circuit of RTC battery-on-a-wire of the affected serial numbers has reversed polarity. As a result fit-PC4 of the affected serial numbers that is disconnected from power will exhibit the following behavior:

  1. Time and date will be reset.
  2. Customized BIOS settings will be reset to default.

The problem can be addressed by replacing the RTC battery with a battery having compatible polarity to fit-PC4. Please contact Compulab fit-PC technical support (support@fit-pc.com +972-4-8290134) to address the issue.

Affected serial numbers: 1170622-21561 to 1180118-00301

To check if the problem applies to your fit-PC4 please do the following:

  1. Enter BIOS and set current date.
  2. Disconnect fit-PC4 from power and wait for 1 minute.
  3. Connect fit-PC4 to power and enter BIOS.

If date has changed to an earlier date then RTC circuit / battery malfunction and you are advised to contact Compulab at support@fit-pc.com +972-4-8290134.


RTC Battery replacement Guide