Difference between revisions of "Fitlet-H BIOS Update"
From fit-PC wiki
(→Updating BIOS) (change visibility) |
|||
Line 1: | Line 1: | ||
− | [https:// | + | [https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates] |
'''<span style="color:#FF0000">Important:</span>'''<br /> | '''<span style="color:#FF0000">Important:</span>'''<br /> |
Revision as of 07:56, 10 October 2018
Follow us on Twitter for software and BIOS updates
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step. * Check for latest BIOS version available fitlet-H BIOS ROM Files and compare to BIOS Version on your fitlet.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive to your computer and format it using FAT32.
- Download and extract Bios Updater package.
The package contains the following files:
- AfuEfix64.efi
- Flash.nsh
- Shellx64.efi
- Copy the extracted files to the formatted USB Flash Drive.
- Download the BIOS binary file.
- Copy the flt.rom file to the root directory on the USB Flash Drive.
Updating BIOS
- Connect the prepared USB flash device to the fitlet and boot.
- Press the DEL key during boot to enter BIOS menu.
- Under Save & Exit tab, select the option “Launch EFI Shell from filesystem device”
- When the system enters the UEFI mode, type the command: FLASH FLTH and press Enter.
- The BIOS flashing process will start.
Note: At the start of the process, the system will hang for 1 minute. This is expected behavior. Please, don’t interrupt it.
- When the process ends and the prompt line appears, type the command: reset and press Enter.
- Press the DEL key during the restart and enter the BIOS menu.
- Under Save & Exit tab, select the option “Restore Defaults” and after that “Save Changes and Reset”.