Difference between revisions of "Fitlet2: BIOS Update"

From fit-PC wiki
Jump to: navigation, search
(BIOS update procedure)   (change visibility)
(BIOS update procedure)   (change visibility)
Line 22: Line 22:
 
* The script will find the Storage Device with EFI update application
 
* The script will find the Storage Device with EFI update application
 
* Type the following command: flash flt2.bin  
 
* Type the following command: flash flt2.bin  
* The BIOS flashing process will start. Ignore the warning at the start of the process.
+
* The BIOS flashing process will start.
* The “FPT Operation Successful” should appear at the end of the flashing process.
+
 
* At the end of the BIOS flashing process, type the following command: reset
 
* At the end of the BIOS flashing process, type the following command: reset
 
* The system will restart and perform the initialization process.
 
* The system will restart and perform the initialization process.

Revision as of 13:13, 23 November 2017

Important:

* BIOS update recommended in case the system is unstable, or required fixes have been released.
* Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.

The following procedure suitable fitlet2 computers equipped with Intel ApolloLake processors.

BIOS update procedure

  • Download and extract the AFU BIOS Updater Package. It contains the following files:
    • AfuEfix64.efi
    • flash.nsh
    • Shellx64.efi
    • startup.nsh
  • Download and extract the fitlet2 BIOS files
  • Format the USB Disk-on-Key with the FAT32 file system
  • Copy the downloaded files to the formatted Disk-on-Key
  • Connect the Disk-On-Key to the target unit
  • Power up the target unit
  • Press the DEL key during the boot until the BIOS Setup appears
  • Browse to the Save & Exit menu
  • Click on the Launch EFI Shell from filesystem device option
  • The system will boot to the EFI Shell, and after 4 seconds the automatic script will start
  • The script will find the Storage Device with EFI update application
  • Type the following command: flash flt2.bin
  • The BIOS flashing process will start.
  • At the end of the BIOS flashing process, type the following command: reset
  • The system will restart and perform the initialization process.