Difference between revisions of "Fitlet2: Revision Notes"
From fit-PC wiki
(→fitlet2 Rev1.2) (change visibility) |
|||
Line 1: | Line 1: | ||
+ | ==fitlet2 Rev 1.3== | ||
+ | * Added reverse polarity protection. | ||
+ | * Added over-voltage protection. | ||
+ | * Added a POE power redundancy, it always works but we had to add protection. | ||
+ | * Added control on the USB ports power supply, the customer can decide if he wants the USB ports will have power on S5 or S3. | ||
+ | * Added control on the power LED, the customer can decide when the orange LED will Lit (S5 or only at S3). | ||
+ | |||
==fitlet2 Rev 1.2== | ==fitlet2 Rev 1.2== | ||
Revision as of 09:15, 24 December 2020
fitlet2 Rev 1.3
- Added reverse polarity protection.
- Added over-voltage protection.
- Added a POE power redundancy, it always works but we had to add protection.
- Added control on the USB ports power supply, the customer can decide if he wants the USB ports will have power on S5 or S3.
- Added control on the power LED, the customer can decide when the orange LED will Lit (S5 or only at S3).
fitlet2 Rev 1.2
- External power button - Add LED power pin feature.
- Power button behavior configuration fix implemented.
- Added on-board Extended Voltage range feature 36V.
- Added analog audio always detect feature
How to identify rev 1.2
SN: 1180601-00001 or higher