Difference between revisions of "Fitlet2 FACET Cards"
From fit-PC wiki
(→FC-SCG) (change visibility) |
|||
Line 78: | Line 78: | ||
==FC-SCG== | ==FC-SCG== | ||
− | The FC-SCG Provides | + | The FC-SCG Provides the following connectivity: |
+ | * RS232/RS485 COM port | ||
+ | * CANbus connectivity | ||
+ | ** [[Linux: CANbus Application]] | ||
+ | * GPIO | ||
+ | ** NOTE: Works as a GPIO extender only. Does not work as an IRQ Extender | ||
+ | ** [[Linux: GPIO Application]] | ||
+ | |||
+ | '''GPIO and CANbus cannot work simultaneously''' | ||
===Schematics === | ===Schematics === |
Revision as of 08:21, 27 September 2018
Function And Connectivity Extension T-Card - (FACET)
- FACET card is an optional extension board providing additional peripherals and IO connectivity options for the fitlet product line.
- The FACET Cards interface is documented to allow 3rd party to design & develop their own application specific FACET Modules.
FC-PCI
FC-PCI has mini-PCIe socket (with connected SIM-card socket) + E-Key M.2 socket + M-Key M.2 socket 2280/2260
Hardware
Schematics
Assembly
Mechanical
FC-CEM
FC-CEM has B-Key M.2 socket (with connected SIM-card socket) + E-Key M.2 socket + M-Key M.2 socket 2280/2260
Schematics
Assembly
Mechanical
FC-USB
FC-USB adds 4 USB2 ports to fitlet2 for a total of 8 ports (2x USB3 + 6x USB2, all type-A connector
Schematics
Assembly
Mechanical
FC-M2LAN
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
Schematics
Assembly
Mechanical
FC-SCG
The FC-SCG Provides the following connectivity:
- RS232/RS485 COM port
- CANbus connectivity
- GPIO
- NOTE: Works as a GPIO extender only. Does not work as an IRQ Extender
- Linux: GPIO Application
GPIO and CANbus cannot work simultaneously
Schematics
- FC-SCG Schematics
- NOTE: Only RS232/RS485 functionality is available at this time.
Assembly
Mechanical
FC-POED
FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.