|
|
(53 intermediate revisions by 3 users not shown) |
Line 1: |
Line 1: |
− | '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card -''' (FACET) | + | * This page provides technical information about [[fitlet2]] FACET-Cards. |
− | | + | * FACET-Cards extend [[fitlet2]] functionality and I/O. |
− | *This page provides technical information of the [[fitlet2]] compatible FACET cards. | + | * FACET-Card stands for '''F'''unction '''A'''nd '''C'''onnectivity '''E'''xtension '''T-Card''' |
− | *FACET-Cards extend [[fitlet2]] functionality and I/O. | + | * FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards |
| + | * The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs |
| + | ==fitlet2 FACET-Card Types== |
| + | * [[FC-CEM FACET Card | '''FC-CEM''']] (''M.2 E-Key + M.2 B-Key + M.2 M-Key'') '''Wide FACET-card''' |
| + | * [[FC-M2LAN FACET Card | '''FC-M2LAN''']] (''2x Gbit Ethernet'') '''Narrow FACET-card''' |
| + | * [[FC-OPLN FACET Card | '''FC-OPLN''']] (''M.2 E-Key + M.2 M-Key + GbE SFP+'') '''Wide FACET-card''' |
| + | * [[FC-PCI FACET Card | '''FC-PCI''']] (''M.2 E-Key + M.2 M-Key + miniPCIe + SIM'') '''Wide FACET-card''' |
| + | * [[FC-POED FACET Card | '''FC-POED''']] (''1xPoE + M.2 E-Key + M.2 M-Key'') '''Wide FACET-card''' |
| + | * [[FC-SCG FACET Card | '''FC-SCG''']] (''CANbus + RS232/RS485 + GPIOs + M.2 E-Key'') '''Narrow FACET-card''' |
| + | * [[FC-USB FACET Card | '''FC-USB''']] (''4x USB2 + M.2 E-Key'') '''Narrow FACET-card''' |
| | | |
| ==Custom FACET-Card design resources== | | ==Custom FACET-Card design resources== |
| ===Mechanical constraints=== | | ===Mechanical constraints=== |
| There are two form-factors of FACET-Cards | | There are two form-factors of FACET-Cards |
| + | {| class="wikitable" border="1" |
| + | | [[File:Narrow_FACET.png|170px|thumb|'''Narrow FACET-Card''']] |
| + | | [[File:Wide_FACET.png|215px|thumb|'''Wide FACET-Card''']] |
| + | |} |
| + | |
| * Narrow occupies the M.2 E-Key slot (leaving the SATA slot native) | | * Narrow occupies the M.2 E-Key slot (leaving the SATA slot native) |
| * Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself) | | * Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself) |
Line 19: |
Line 33: |
| * [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)] | | * [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)] |
| | | |
− | ===FACET-Card pinout===
| |
− |
| |
− | [[FC-PCI fitlet2 FACET Pinout description table]]
| |
− |
| |
− | ==FC-PCI==
| |
− | * Type: [[Wide FACET Card]]
| |
− | * Features:
| |
− | ** M.2 E-Key socket (usually used for Wi-Fi)
| |
− | ** miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
| |
− | ** M.2 M-Key socket 2260 | 2280 for SATA SSD
| |
− | <br>
| |
− | [[File:fc-pci-top.jpg|200px]]
| |
− | [[File:fc-pci-bottom.jpg|200px|middle]]
| |
− |
| |
− | ===Instructions===
| |
− | * [[fitlet2 FC-PCI installation instructions]]
| |
− |
| |
− | ===Hardware===
| |
− | * [[FC-PCI Pinout description table]]
| |
− |
| |
− | ===Schematics ===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]
| |
− |
| |
− | ===Layout===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]
| |
− |
| |
− | ===Mechanical===
| |
− | [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>
| |
− | [https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-CEM==
| |
− | * Type: [[Wide FACET Card]]
| |
− | * Features:
| |
− | ** M.2 E-Key socket (usually used for Wi-Fi)
| |
− | ** M.2 B-Key socket + SIM socket (for M.2 cellular modem)
| |
− | ** M.2 M-Key socket 2260 | 2280 for SATA SSD
| |
− | <br>
| |
− | [[File:FC-CEM-top.jpg|200px]]
| |
− | [[File:FC-CEM-bottom.jpg|200px|middle]]
| |
− |
| |
− | ===Instructions===
| |
− | * [[fitlet2 FC-CEM installation instructions]]
| |
− |
| |
− | ===Schematics===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
| |
− |
| |
− | ===Layout===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
| |
− |
| |
− | ===Mechanical===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-PCI Mechanical - DXF]<br>
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-PCI Mechanical - PDF]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-USB==
| |
− | * Type: [[Narrow FACET Card]]
| |
− | * Features:
| |
− | ** 4x USB2 ports (type A)
| |
− |
| |
− | fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
| |
− | <br>
| |
− | [[File:fc-usb-top.jpg|200px]]
| |
− | [[File:fc-usb-bottom.jpg|200px|middle]]
| |
− |
| |
− | ===Instructions===
| |
− | * [[fitlet2 FC-USB installation instructions]]
| |
− |
| |
− | ===Schematics ===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-1_1-Schematics.zip
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Assembly files]
| |
− |
| |
− | ===Layout===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files]
| |
− |
| |
− | ===Mechanical===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-M2LAN==
| |
− | * Type: [[Narrow FACET Card]]
| |
− | * Features:
| |
− | ** 2x Gbit Ethernet ports (Intel i211)
| |
− |
| |
− | FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
| |
− | <br>
| |
− |
| |
− | [[File:FC-M2LAN-top.jpg|200px]]
| |
− | [[File:FC-M2LAN-bottom.jpg|200px|middle]]
| |
− |
| |
− | ===Instructions===
| |
− | * [[Fitlet2 FC-M2LAN installation instructions]]
| |
− | ===Schematics===
| |
− | * [http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN.pdf FC-M2LAN Schematics]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyCS.pdf FC-M2LAN placement Component side]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/FC-M2LAN-AssyPS.pdf FC-M2LAN placement Print side]
| |
− |
| |
− | ===Layout===
| |
− | TBD
| |
− |
| |
− | ===Mechanical===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-SCG==
| |
− | * Type: [[Narrow FACET Card]]
| |
− | * Features:
| |
− | ** CANbus
| |
− | ** RS232/RS485
| |
− | ** GPIOs
| |
− | Includes the following socket:
| |
− | * M.2 E-key 2230 (usually used for WiFi adapter)
| |
− | <br>
| |
− | [[File:fc-scg-top.jpg|200px]]
| |
− | [[File:fc-scg-bottom.jpg|200px|middle]]
| |
− |
| |
− | ===Application notes===
| |
− | * [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
| |
− | * [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
| |
− | Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
| |
− |
| |
− | Note: GPIO and CANbus cannot work simultaneously
| |
− |
| |
− | ===Schematics ===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-Schematics.pdf FC-SCG Schematics]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyCS.pdf FC-SCG placement Component side]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-rev1-AssyPS.pdf FC-SCG placement Print side]
| |
− |
| |
− | ===Layout===
| |
− | TBD
| |
− |
| |
− | ===Mechanical===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-POED==
| |
− | * Type: [[Wide FACET Card]]
| |
− | * Features:
| |
− | ** 802.3af compliant PoE device port with Gbit Ethernet (Intel i211)
| |
− | ** M.2 E-Key socket (usually used for Wi-Fi)
| |
− | ** M.2 M-Key socket 2260 | 2280 for SATA SSD
| |
− |
| |
− | FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
| |
− | <br>
| |
− | [[File:fc-poed-top-front.jpg|200px]]
| |
− | [[File:fc-poed-bottom-front.jpg|200px|middle]]
| |
− |
| |
− | ===Instructions===
| |
− | * [[fitlet2 FC-POED installation instructions]]
| |
− |
| |
− | ===Schematics ===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POE.pdf FC-POED Schematics]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyCS.pdf FC-POED placement Component side]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POE-v1-AssyPS.pdf FC-POED placement Print side]
| |
− |
| |
− | ===Layout===
| |
− | TBD
| |
− |
| |
− | ===Mechanical===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
| |
− |
| |
− | ===Specifications===
| |
− | * TBD
| |
− |
| |
− | ==FC-OPLN==
| |
− | * Type: [[Wide FACET Card]]
| |
− | * Features:
| |
− | ** M.2 E-Key socket (usually used for Wi-Fi)
| |
− | ** M.2 M-Key socket 2260 | 2280 for SATA SSD
| |
− | ** SFP+ socket for optical GbE connection.
| |
− | <br>
| |
− | [[File:fc-opln-bottom.jpg|200px|middle]]
| |
− | [[File:fc-opln-top.jpg|200px]]
| |
− |
| |
− | ===Schematics ===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-Schematics.pdf FC-OPLN Schematics]
| |
− |
| |
− | ===Assembly===
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyCS.pdf FC-OPLN Placement Component side]
| |
− | * [https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-AssyPS.pdf FC-OPLN Placement Print side]
| |
− |
| |
− | ===Layout===
| |
− | TBD
| |
− |
| |
− | ===Mechanical===
| |
− | * [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
| |
− | * [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
| |
− | * [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
| |
− | * [http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
| |
− |
| |
− | ===Specifications===
| |
− |
| |
− | * Supported 1Gbps SFP/SFP+ transceiver
| |
− | * LEDs: LAN SFP link/activity indication:
| |
− | ** Right (DS1) green LED: ON - Link, Blink - Link and activity
| |
− | ** Left (DS2) green LED: ON - 100 Mbps link
| |
− | ** Left (DS2) orange LED: ON - 1000 Mbps link.
| |
− | * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
| |
− | ** M.2 Key-E: 2230 (usually used for WiFi & BT module)
| |
− | * Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
| |
− | ** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
| |
− | ** Integrated Non-Volatile Memory
| |
− | ** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
| |
− | *** Proxy: ECMA-393 and Windows logo for proxy offload
| |
− | ** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
| |
− | *** IEEE 802.1Qav traffic shaper (with software extensions)
| |
− | ** Jumbo frames
| |
− | ** Interrupt moderation, VLAN support, IP checksum offload
| |
− | ** RSS and MSI-X to lower CPU utilization in multi-core systems
| |
− | ** Advanced cable diagnostics, auto MDI-X
| |
− | ** ECC – error correcting memory in packet buffers
| |
| | | |
| [[category:fitlet2]] | | [[category:fitlet2]] |
| [[category:Extension boards]] | | [[category:Extension boards]] |