Difference between revisions of "Fitlet2 FACET Cards"

From fit-PC wiki
Jump to: navigation, search
(Production files)   (change visibility)
(fitlet2 FACET-Card Types)   (change visibility)
 
(18 intermediate revisions by 2 users not shown)
Line 4: Line 4:
 
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
 
* FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
 
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
 
* The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs
 +
==fitlet2 FACET-Card Types==
 +
* [[FC-CEM FACET Card | '''FC-CEM''']] (''M.2 E-Key + M.2 B-Key + M.2 M-Key'') '''Wide FACET-card'''
 +
* [[FC-M2LAN FACET Card | '''FC-M2LAN''']] (''2x Gbit Ethernet'') '''Narrow FACET-card'''
 +
* [[FC-OPLN FACET Card | '''FC-OPLN''']] (''M.2 E-Key + M.2 M-Key + GbE SFP+'') '''Wide FACET-card'''
 +
* [[FC-PCI FACET Card | '''FC-PCI''']] (''M.2 E-Key + M.2 M-Key + miniPCIe + SIM'') '''Wide FACET-card'''
 +
* [[FC-POED FACET Card | '''FC-POED''']] (''1xPoE + M.2 E-Key + M.2 M-Key'') '''Wide FACET-card'''
 +
* [[FC-SCG FACET Card | '''FC-SCG''']] (''CANbus + RS232/RS485 + GPIOs + M.2 E-Key'') '''Narrow FACET-card'''
 +
* [[FC-USB FACET Card | '''FC-USB''']] (''4x USB2 + M.2 E-Key'') '''Narrow FACET-card'''
  
 
==Custom FACET-Card design resources==
 
==Custom FACET-Card design resources==
 
===Mechanical constraints===
 
===Mechanical constraints===
 
There are two form-factors of FACET-Cards
 
There are two form-factors of FACET-Cards
 +
{| class="wikitable" border="1"
 +
| [[File:Narrow_FACET.png|170px|thumb|'''Narrow FACET-Card''']]
 +
| [[File:Wide_FACET.png|215px|thumb|'''Wide FACET-Card''']]
 +
|}
 +
 
* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
 
* Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
 
* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)
 
* Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)
Line 19: Line 32:
 
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.DXF wide FACET-Card envelope (DXF)]
 
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.DXF wide FACET-Card envelope (DXF)]
 
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)]
 
* [https://fit-iot.com/files/mechanical/FACETS/FITLET2-FACET-wide-type-envelope.PDF wide FACET-Card envelope (PDF)]
 
===FACET-Card pinout===
 
 
[[FC-PCI fitlet2 FACET Pinout description table]]
 
 
==FC-PCI==
 
 
* Type: [[Wide FACET Card]]
 
* Features:
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** miniPCIe socket (for miniPCIe adapters) + SIM socket (for miniPCIe cellular modem)
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
 
<br>
 
[[File:fc-pci-top.jpg|200px]]
 
[[File:fc-pci-bottom.jpg|200px|middle]]
 
 
===Specifications===
 
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 
* Mini PCI connector - usually used for Cell modem module
 
* Micro-SIM card socket
 
 
===Instructions===
 
* [[fitlet2 FC-PCI installation instructions]]
 
 
===Hardware===
 
* [[FC-PCI Pinout description table]]
 
 
===Production files===
 
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Schematics/FC-PCI-REV-1.0-schematics.pdf FC-PCI Schematics]
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Assembly/FC-PCI-1_1-Assembly.zip FC-PCI Rev1.1 Assembly files]
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Layout/FC-PCI-1_1-Layout.zip FC-PCI Rev1.1 Layout files]
 
*Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.DXF FC-PCI Mechanical - DXF]<br>
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-PCI/Mechanical/FC-PCI-PCB.PDF FC-PCI Mechanical - PDF]
 
 
==FC-CEM==
 
* Type: [[Wide FACET Card]]
 
* Features:
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** M.2 B-Key socket + SIM socket (for M.2 cellular modem)
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
 
<br>
 
[[File:FC-CEM-top.jpg|200px]]
 
[[File:FC-CEM-bottom.jpg|200px|middle]]
 
 
===Specifications===
 
* M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 
* M.2 Key-B: 3042 (usually used for Cell modem module)
 
* Micro-SIM card socket
 
 
===Instructions===
 
* [[fitlet2 FC-CEM installation instructions]]
 
 
===Production files===
 
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Schematics/FC-CEM-1_0-Schematic.zip FC-CEM Rev1.0 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files//mechanical/FACETS/FC-CEM/Assembly/FC-CEM-1_0-Assembly.zip FC-CEM Rev1.0 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Layout/FC-CEM-1_0-Layout.zip FC-CEM Rev1.0 Layout files]
 
 
*Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.DXF FC-CEM Mechanical - DXF]<br>
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-CEM/Mechanical/FC-CEM.PDF FC-CEM Mechanical - PDF]
 
 
==FC-USB==
 
* Type: [[Narrow FACET Card]]
 
* Features:
 
** 4x USB2 ports (type A)
 
 
fitlet2 with FC-USB has 8 USB ports (2x USB3 + 6x USB2), all type-A connectors
 
<br>
 
[[File:fc-usb-top.jpg|200px]]
 
[[File:fc-usb-bottom.jpg|200px|middle]]
 
 
===Specifications===
 
* Downstream ports compatible with HS (480Mb), FS (12Mb) and LS (1.5Mb)
 
* The USB port supports in single transaction translator (TT)
 
* port current limit - Up to 0.5A
 
 
===Instructions===
 
* [[fitlet2 FC-USB installation instructions]]
 
 
===Production files===
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Schematics/FC-USB-1_1-Schematics.zip FC-USB Rev1.1 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Assembly/FC-USB-1_1-Assembly.zip FC-USB Rev1.1 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Layout/FC-USB-1_1-Layout.ZIP FC-USB Rev1.1 Layout files]
 
 
*Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-bottom.dxf FC-USB Mech Bottom]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-USB/Mechanical/FC-USB-v1.0-top.dxf FC-USB Mech Top]
 
 
 
 
==FC-M2LAN==
 
* Type: [[Narrow FACET Card]]
 
* Features:
 
** 2x Gbit Ethernet ports (Intel i211)
 
 
FC-M2LAN adds dual Gbit Ethernet ports to fitlet2 for a total of 4 ports.
 
<br>
 
 
===Specifications===
 
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
 
**  PCIe interface: PCIe v2.1 (2.5 GT/s) x1
 
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
 
** Proxy: ECMA-393 and Windows logo for proxy offload
 
** Jumbo frames
 
** Interrupt moderation, VLAN support, IP checksum offload
 
** RSS and MSI-X to lower CPU utilization in multi-core systems
 
** Advanced cable diagnostics, auto MDI-X
 
** ECC – error correcting memory in packet buffers
 
** Four Software Definable Pins (SDPs)
 
** Right (DS1) green LED: ON - Link, Blink - Link and activity
 
** Left (DS2) green LED: ON - 100 Mbps link
 
** Left (DS2) orange LED: ON - 1000 Mbps link.
 
 
 
[[File:FC-M2LAN-top.jpg|200px]]
 
[[File:FC-M2LAN-bottom.jpg|200px|middle]]
 
 
===Instructions===
 
*[[Fitlet2 FC-M2LAN installation instructions]]
 
 
===Production files===
 
*Schematics
 
**[http://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Schematics/FC-M2LAN-1_0-Schematics.rar FC-M2LAN Rev1.0 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Assembly/FC-M2LAN-1_0-Assembly.rar FC-M2LAN Rev1.0 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Layout/FC-M2LAN-1_0-Layout.zip FC-M2LAN Rev1.0 Layout files]
 
 
*Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-TOP.dxf FC-M2LAN Mechanical Top]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-M2LAN/Mechanical/FC-M2LAN-bottom.dxf FC-M2LAN mechaical Bottom]
 
 
==FC-SCG==
 
* Type: [[Narrow FACET Card]]
 
* Features:
 
** CANbus
 
** RS232/RS485
 
** GPIOs
 
Includes the following socket:
 
* M.2 E-key 2230 (usually used for WiFi adapter)
 
<br>
 
[[File:fc-scg-top.jpg|200px]]
 
[[File:fc-scg-bottom.jpg|200px|middle]]
 
 
===Instructions===
 
* [[Fitlet2 FC-SCG installation instructions]]
 
 
===Hardware===
 
* [[FSCG RS232/RS485 pinout table]]
 
 
===Application notes===
 
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
 
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
 
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
 
 
Note: GPIO and CANbus cannot work simultaneously
 
 
===Production files===
 
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
 
 
Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
 
 
==FC-POED==
 
* Type: [[Wide FACET Card]]
 
* Features:
 
** 802.3af/802.3at compliant PoE device port with Gbit Ethernet (Intel i211)
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
 
 
FC-POED allows powering fitlet2 from a POE source while providing a 3rd Gbit Ethernet port.
 
<br>
 
[[File:fc-poed-top-front.jpg|200px]]
 
[[File:fc-poed-bottom-front.jpg|200px|middle]]
 
 
===Specifications===
 
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 
* M.2 Key-E: 2230 (usually used for WiFi & BT module)
 
* Ethernet controllers: Intel I211IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
 
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
 
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
 
** Proxy: ECMA-393 and Windows logo for proxy offload
 
** Jumbo frames
 
** Interrupt moderation, VLAN support, IP checksum offload
 
** RSS and MSI-X to lower CPU utilization in multi-core systems
 
** Advanced cable diagnostics, auto MDI-X
 
** ECC – error correcting memory in packet buffers
 
** Four Software Definable Pins (SDPs)
 
** Right (DS1) green LED: ON - Link, Blink - Link and activity
 
** Left (DS2) green LED: ON - 100 Mbps link
 
** Left (DS2) orange LED: ON - 1000 Mbps link.
 
** IEEE 802.3 at PD Solution Interface controller supported includes Detection Hardware Classification
 
* Inrush current limit (200-mA) during startup
 
* Enhanced features includes automatic Maintain Power Signature (MPS)
 
 
===Instructions===
 
* [[fitlet2 FC-POED installation instructions]]
 
 
===Production files===
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Schematics/FC-POED-1_1-Schematics.rar FC-POED Rev1.0 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Assembly/FC-POED-1_0Assembly.zip FC-POED Rev1.0 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Layout/FC-POED-1_0-Layout.zip FC-POED Rev1.0 Layout files]
 
 
*Mechanical
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-bottom.dxf FC-POED Mech Bottom]
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-POED/Mechanical/FC-POE-top.dxf FC-POED Mech Top]
 
 
==FC-OPLN==
 
* Type: [[Wide FACET Card]]
 
* Features:
 
** M.2 E-Key socket (usually used for Wi-Fi)
 
** M.2 M-Key socket 2260 | 2280 for SATA SSD
 
** SFP+ socket for optical GbE connection.
 
<br>
 
[[File:fc-opln-bottom.jpg|200px|middle]]
 
[[File:fc-opln-top.jpg|200px]]
 
 
===Specifications===
 
* Supported 1Gbps SFP/SFP+ transceiver
 
* LEDs: LAN SFP link/activity indication:
 
** Right (DS1) green LED: ON - Link, Blink - Link and activity
 
** Left (DS2) green LED: ON - 100 Mbps link
 
** Left (DS2) orange LED: ON - 1000 Mbps link.
 
* provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
 
** M.2 Key-E: 2230 (usually used for WiFi & BT module)
 
* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
 
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
 
** Integrated Non-Volatile Memory
 
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
 
*** Proxy: ECMA-393 and Windows logo for proxy offload
 
** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
 
*** IEEE 802.1Qav traffic shaper (with software extensions)
 
** Jumbo frames
 
** Interrupt moderation, VLAN support, IP checksum offload
 
** RSS and MSI-X to lower CPU utilization in multi-core systems
 
** Advanced cable diagnostics, auto MDI-X
 
** ECC – error correcting memory in packet buffers
 
 
===Instructions===
 
* [[Fitlet2 FC-OPLN installation instructions]]
 
 
===Production files===
 
*Schematics
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Schematics/FC-OPLN-1_0-Schematics.zip FC-OPLN Rev1.0 Schematic files]
 
 
*Assembly
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Assembly/FC-OPLN-1_0-Assembly.zip FC-OPLN Rev1.0 Assembly files]
 
 
*Layout
 
**[https://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Layout/FC-OPLN-1_0-Layout.zip FC-OPLN Rev1.0 Layout files]
 
 
*Mechanical
 
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN.dxf FC-OPLEN Mech Top]
 
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC_OPLN-Bottom.dxf FC-OPLN Mech bottom]
 
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.STP FC-OPLN 3D .STP file]
 
**[http://fit-iot.com/files/mechanical/FACETS/FC-OPLN/Mechanical/FC-OPLN_asm.x_t FC-OPLN 3D .x_t file]
 
 
  
  
 
[[category:fitlet2]]
 
[[category:fitlet2]]
 
[[category:Extension boards]]
 
[[category:Extension boards]]

Latest revision as of 14:27, 14 September 2020

  • This page provides technical information about fitlet2 FACET-Cards.
  • FACET-Cards extend fitlet2 functionality and I/O.
  • FACET-Card stands for Function And Connectivity Extension T-Card
  • FACET-Card standard is open to allow 3rd parties to design their own application specific FACET-Cards
  • The full production files of each Compulab FACET-Card are published below to allow 3rd parties to modify for their needs

fitlet2 FACET-Card Types

  • FC-CEM (M.2 E-Key + M.2 B-Key + M.2 M-Key) Wide FACET-card
  • FC-M2LAN (2x Gbit Ethernet) Narrow FACET-card
  • FC-OPLN (M.2 E-Key + M.2 M-Key + GbE SFP+) Wide FACET-card
  • FC-PCI (M.2 E-Key + M.2 M-Key + miniPCIe + SIM) Wide FACET-card
  • FC-POED (1xPoE + M.2 E-Key + M.2 M-Key) Wide FACET-card
  • FC-SCG (CANbus + RS232/RS485 + GPIOs + M.2 E-Key) Narrow FACET-card
  • FC-USB (4x USB2 + M.2 E-Key) Narrow FACET-card

Custom FACET-Card design resources

Mechanical constraints

There are two form-factors of FACET-Cards

Narrow FACET-Card
Wide FACET-Card
  • Narrow occupies the M.2 E-Key slot (leaving the SATA slot native)
  • Wide FACET-Card occupies both M.2 slot (usually requiring SATA slot on the FACET itself)

Narrow FACET-Card mechanical constraints

Wide FACET-Card mechanical constraints