Difference between revisions of "Fitlet Errata Notes"
From fit-PC wiki
(→FITLETERR002: USB current limit) (change visibility) |
|||
(7 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | == | + | == FITLETERR001: SIM slot == |
− | + | * '''Date''': 29-Apr-2015 | |
− | + | ||
− | * '''Date''': | + | |
* '''Symptom''': SIM card is not detected while in micro SIM slot | * '''Symptom''': SIM card is not detected while in micro SIM slot | ||
* '''Applies to revision(s)''': 1.0 to 1.1 | * '''Applies to revision(s)''': 1.0 to 1.1 | ||
Line 9: | Line 7: | ||
* '''Fix''': Fixed in revision 1.2 | * '''Fix''': Fixed in revision 1.2 | ||
− | == | + | == FITLETERR002: USB current limit == |
* '''Date''': 6-Oct-2015 | * '''Date''': 6-Oct-2015 | ||
* '''Symptom''': When connecting high power USB device, fitlet may reboot. Most likely to happen on insertion of the device. | * '''Symptom''': When connecting high power USB device, fitlet may reboot. Most likely to happen on insertion of the device. | ||
Line 18: | Line 16: | ||
[[category:fitlet]] | [[category:fitlet]] | ||
+ | [[category:errata notes]] |
Latest revision as of 08:21, 12 February 2018
FITLETERR001: SIM slot
- Date: 29-Apr-2015
- Symptom: SIM card is not detected while in micro SIM slot
- Applies to revision(s): 1.0 to 1.1
- Cause: Incorrect SIM slot pin routing
- Workaround: RMA for manual patch
- Fix: Fixed in revision 1.2
FITLETERR002: USB current limit
- Date: 6-Oct-2015
- Symptom: When connecting high power USB device, fitlet may reboot. Most likely to happen on insertion of the device.
- Applies to revision(s): 1.0 to 1.3
- Cause: Incorrect routing of USB current-limiter is causing current-limiting of USB to malfunction. High current of USB device may reset fitlet.
- Workaround: Low-power USB devices – keyboard, mouse, webcam, thumb drive, WiFi adapter are not affected. To work around the problem with USB hard disks plug the disk when fitlet is off or use a powered USB hub.
- Fix: Will be fixed in revision 1.4