Difference between revisions of "Fitlet Troubleshooting"
From fit-PC wiki
(Created page with '1. fitlet BIOS reset: ::a. Power down the PC and unplug the power cable. ::b. Open the bottom cover (by unscrewing 4 bolts) and remove it. ::c. Reset the BIOS by pressing low pro...') (change visibility) |
|||
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
1. fitlet BIOS reset: | 1. fitlet BIOS reset: | ||
− | + | *Power down the PC and unplug the power cable. | |
− | + | *Open the bottom cover (by unscrewing 4 bolts) and remove it. | |
− | + | *Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below. | |
− | + | *Plug the power and power up the PC (either auto-on or pressing power button). | |
− | + | *Note: [https://plus.google.com/+Fitpc-by-compulab/posts/ZFTD5xqMMqa fitlet disassembly video] | |
:: [[File:Fitlet_BIOS_reset.jpg]] | :: [[File:Fitlet_BIOS_reset.jpg]] | ||
− | |||
2. Check the RAM memory: | 2. Check the RAM memory: | ||
− | + | *Remove the top cover (refer to [http://fit-pc.com/download/fitlet/documents/fitlet-owners-manual.pdf fitlet Owner’s Manual]) | |
− | + | *Verify RAM module is installed and in place. The system will not boot without memory. | |
− | + | *fitlet should be used with low power (1.35V) memory only. | |
− | + | *Install the memory back. | |
− | + | ||
3. Power up without storage: | 3. Power up without storage: | ||
− | + | *Try to enter the BIOS by clicking ''Del'' during boot | |
− | + | ||
4. Power supply: | 4. Power supply: | ||
− | + | *Verify the power supply is not damaged and functions properly. | |
− | + | *If you have another power supply use it to eliminate and determine the failing side. | |
− | + | *In case you use other power supply make sure it provides uninterrupted power and stable grounding. | |
+ | 5. [[fitlet: BIOS Update | fitlet BIOS Update]] | ||
− | + | 6. [http://www.fit-pc.com/web/support/rma/ RMA procedure] | |
[[category:fitlet]] | [[category:fitlet]] |
Latest revision as of 12:35, 19 October 2015
1. fitlet BIOS reset:
- Power down the PC and unplug the power cable.
- Open the bottom cover (by unscrewing 4 bolts) and remove it.
- Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below.
- Plug the power and power up the PC (either auto-on or pressing power button).
- Note: fitlet disassembly video
2. Check the RAM memory:
- Remove the top cover (refer to fitlet Owner’s Manual)
- Verify RAM module is installed and in place. The system will not boot without memory.
- fitlet should be used with low power (1.35V) memory only.
- Install the memory back.
3. Power up without storage:
- Try to enter the BIOS by clicking Del during boot
4. Power supply:
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.