Difference between revisions of "How to install FreeBSD on fitlet2"

From fit-PC wiki
Jump to: navigation, search
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
# Download the FreeBSD release from https://www.freebsd.org
+
1. Download the FreeBSD release from https://www.freebsd.org
  
 
     $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img
 
     $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img
  
# Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):
+
2. Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):
  
 
     $ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB
 
     $ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB
  
# Necessary BIOS settings changes:
+
3. Necessary BIOS settings changes
  
:Press [Del] during boot to enter BIOS settings:
+
::Press [DEL] during boot to enter BIOS settings and set the following to:
  
     Set Chipset -> OS Selection to [Intel Linux]
+
     Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support '''[Disabled]'''
    Set Chipset -> SCC Configuration -> SCC SD Card Support (D27: F0) to [Disable]
+
     Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support '''[Disabled]'''
     Set Chipset -> SCC Configuration -> SCC eMMC Support (D28: F0) to [Disable]
+
     Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support '''[Disabled]'''
     Set Chipset -> SCC Configuration -> SCC UFS Support (D29: F0) to [Disable]
+
    Set Chipset -> SCC Configuration -> SCC SDIO Support (D30: F0) to [Disable]
+
  
# Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.
+
4. Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.
 +
 
 +
 
 +
[[category:Application notes]]
 +
[[category:fitlet2]]
 +
[[category:software]]

Latest revision as of 13:20, 4 November 2018

1. Download the FreeBSD release from https://www.freebsd.org

   $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img

2. Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):

   $ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB

3. Necessary BIOS settings changes

Press [DEL] during boot to enter BIOS settings and set the following to:
   Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support [Disabled]
   Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support [Disabled]
   Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support [Disabled]

4. Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.