How to install FreeBSD on fitlet2
From fit-PC wiki
Revision as of 06:46, 15 April 2018 by Tamir (Talk | contribs) (Created page with "#. Download the FreeBSD release from https://www.freebsd.org $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memst...")
- . Download the FreeBSD release from https://www.freebsd.org
$ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img
- . Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):
$ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB
- . Necessary BIOS settings changes:
- Press [Del] during boot to enter BIOS settings:
Set Chipset -> OS Selection to [Intel Linux] Set Chipset -> SCC Configuration -> SCC SD Card Support (D27: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC eMMC Support (D28: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC UFS Support (D29: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC SDIO Support (D30: F0) to [Disable]
- . Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.