Difference between revisions of "IPC2B: USB3.0 Driver Installation Guide"
From fit-PC wiki
| Line 1: | Line 1: | ||
| − | * Install the Chipset driver before the USB3.0 driver | + | * Install the [http://fit-iot.com/files/download/intense-pc2/sw/drivers/win7/IPC2_BDW_Win7_Chipset.zip Chipset driver] driver before the USB3.0 driver |
* Download the [http://fit-iot.com/files/download/intense-pc2/sw/drivers/win7/IPC2_BDW_Win7_USB30.zip USB3.0 driver] | * Download the [http://fit-iot.com/files/download/intense-pc2/sw/drivers/win7/IPC2_BDW_Win7_USB30.zip USB3.0 driver] | ||
* Open the donloaded package | * Open the donloaded package | ||
Revision as of 08:21, 14 October 2018
- Install the Chipset driver driver before the USB3.0 driver
- Download the USB3.0 driver
- Open the donloaded package
- Run the OfflineSetup32.exe file for Windows 7 32bit or the OfflineSetup64.exe file for Windows 7 64bit
- Follow the on-screen instructions
- At the the end of installation process, reset the unit
- Enter the BIOS menu by pressing the F2 key during the boot
- Browse to the Advanced -> South Bridge Configuration -> SB USB Config menu and set the xHCI Mode setting to Enabled
- Press the F10 key for Save&Exit
- When the Windwos boot up, open the donloaded package
- Run the Setup.exe file
- Follow the on-screen instructions
- At the the end of installation process, reset the unit
