Difference between revisions of "IPC2 BIOS Update"
From fit-PC wiki
Line 9: | Line 9: | ||
#Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable" | ||
#Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly | ||
− | #Go to "Exit" and press "Exit Saving | + | #Go to "Exit" and press "Exit Saving Changes" |
#IPC2 will restart and BIOS update will take place | #IPC2 will restart and BIOS update will take place | ||
#Wait for "BIOS is updated successfully. Press any key to continue ..." message | #Wait for "BIOS is updated successfully. Press any key to continue ..." message |
Revision as of 12:17, 31 August 2014
BIOS update procedure
- Prepare FAT formatted USB Disk-on-key
- Download the latest IPC2 BIOS ROM files
- Unzip and copy 3 files to the root directory:
- IPC2.cap
- startup.nsh
- ShellFlash64.efi
- Ensure no other boot-able USB devices connected
- Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
- Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
- Go to "Exit" and press "Exit Saving Changes"
- IPC2 will restart and BIOS update will take place
- Wait for "BIOS is updated successfully. Press any key to continue ..." message
- Remove USB disk and press ENTER
- System may do several power cycles and then boot normally
- Configure the settings of the new BIOS according to your needs