Difference between revisions of "IPC2 BIOS Update"
From fit-PC wiki
| Line 15: | Line 15: | ||
#System may do several power cycles and then boot normally | #System may do several power cycles and then boot normally | ||
#Configure the settings of the new BIOS according to your needs | #Configure the settings of the new BIOS according to your needs | ||
| + | |||
Note: In case of errors, it may be needed to remove all storage devices and perform the | Note: In case of errors, it may be needed to remove all storage devices and perform the | ||
programming process with USB flash drive only | programming process with USB flash drive only | ||
Revision as of 12:40, 1 September 2014
BIOS update procedure
- Prepare FAT formatted USB Disk-on-key
- Download the latest IPC2 BIOS ROM files
- Unzip and copy 3 files to the root directory:
- IPC2.cap
- startup.nsh
- ShellFlash64.efi
- Insert the USB flash drive and ensure no other boot-able USB devices connected
- Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
- Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
- Go to "Exit" and press "Exit Saving Changes"
- IPC2 will restart and BIOS update will take place
- Wait for "BIOS is updated successfully. Press any key to continue ..." message
- Remove USB disk and press ENTER
- System may do several power cycles and then boot normally
- Configure the settings of the new BIOS according to your needs
Note: In case of errors, it may be needed to remove all storage devices and perform the
programming process with USB flash drive only
