|
|
| Line 1: |
Line 1: |
| | [https://plus.google.com/104822148679589455238/posts Follow us on Google+ for software and BIOS updates] | | [https://plus.google.com/104822148679589455238/posts Follow us on Google+ for software and BIOS updates] |
| | | | |
| | + | === BIOS update instructions === |
| | * [[IPC2 Haswell BIOS update]] | | * [[IPC2 Haswell BIOS update]] |
| | * [[IPC2 Broadwell BIOS update]] | | * [[IPC2 Broadwell BIOS update]] |
| − |
| |
| − | ==BIOS update procedure==
| |
| − | The following procedure suitable for all OS: Windows 7/8, Linux in non-UEFI mode:
| |
| − |
| |
| − | 1. Prepare bootable USB DOS image
| |
| − | * Use "Image Write for Windows" utility https://launchpad.net/win32-image-writer/
| |
| − | * Connect the USB flash device to your host PC (ensure that you don't have any other USB mass storage devices connected)
| |
| − | * Run Win32DiskImager.exe
| |
| − | * Select the target disk in the Device drop-box
| |
| − | * Select DOS_IMG.IMG (found in the package) in the Image File search-box
| |
| − | * Press Write button to proceed
| |
| − | * Wait until completion
| |
| − | * Disconnect the USB flash device and connect it again. It should now be assigned a drive letter.
| |
| − | 2. Download the latest '''[[IPC2 BIOS ROM files]]'''<br>
| |
| − | 3. Unzip and copy 3 files to the root directory:
| |
| − | * IPC2.cap
| |
| − | * BIOS.BAT
| |
| − | * DOSFLASH.EXE
| |
| − | 4. Insert prepared USB disk into IPC2 and boot<br>
| |
| − | 5. Run BIOS.bat and wait until completion (system will reboot and flash BIOS)<br>
| |
| − | 6. After compilation remove USB disk , remove power and do regular boot<br>
| |
| − |
| |
| | | | |
| | === Links === | | === Links === |
| Line 31: |
Line 10: |
| | | | |
| | | | |
| − | <!--
| |
| − | The following procedure true under Windows 7 and Linux in non-UEFI mode operating systems:
| |
| − | #Connect at least one display via HDMI port
| |
| − | #Prepare FAT formatted USB Disk-on-key
| |
| − | #Download the latest [[IPC2 BIOS ROM files]]
| |
| − | #Unzip and copy 3 files to the root directory:
| |
| − | #*IPC2.cap
| |
| − | #*startup.nsh
| |
| − | #*ShellFlash64.efi
| |
| − | #Insert the USB flash drive and ensure no other boot-able USB devices connected
| |
| − | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
| |
| − | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
| |
| − | #Go to "Exit" and press "Exit Saving Changes"
| |
| − | #IPC2 will restart and BIOS update will take place
| |
| − | #Wait for "BIOS is updated successfully. Press any key to continue ..." message
| |
| − | #Remove USB disk and press ENTER
| |
| − | #System may do several power cycles and then boot normally
| |
| − | #Configure the settings of the new BIOS according to your needs
| |
| − |
| |
| − | '''Important notes''':
| |
| − | *In case of errors, it may be needed to remove all storage devices and perform the programming process with USB flash drive only.
| |
| − | *Under Windows 8 and Linux in UEFI mode operating systems other procedure should be followed.
| |
| − | *BIOS update resets any previous display configurations, setting HDMI ports as default outputs. If a display connected via DisplayPort interface, it resets and screen will go black.
| |
| − | -->
| |
| | [[category:IPC2]] | | [[category:IPC2]] |
| | [[Category:BIOS]] | | [[Category:BIOS]] |
