|
|
(11 intermediate revisions by 2 users not shown) |
Line 1: |
Line 1: |
− | ==BIOS update procedure==
| + | [https://plus.google.com/104822148679589455238/posts Follow us on Google+ for software and BIOS updates] |
− | #Prepare FAT formatted USB Disk-on-key
| + | |
− | #Download the latest [[IPC2 BIOS ROM files]]
| + | |
− | #Unzip and copy 3 files to the root directory:
| + | |
− | #*IPC2.cap
| + | |
− | #*startup.nsh
| + | |
− | #*ShellFlash64.efi
| + | |
− | #Insert the USB flash drive and ensure no other boot-able USB devices connected
| + | |
− | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
| + | |
− | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
| + | |
− | #Go to "Exit" and press "Exit Saving Changes"
| + | |
− | #IPC2 will restart and BIOS update will take place
| + | |
− | #Wait for "BIOS is updated successfully. Press any key to continue ..." message
| + | |
− | #Remove USB disk and press ENTER
| + | |
− | #System may do several power cycles and then boot normally
| + | |
− | #Configure the settings of the new BIOS according to your needs
| + | |
| | | |
| + | === BIOS update instructions === |
| + | * [[IPC2 Haswell BIOS update]] |
| + | * [[IPC2 Broadwell BIOS update]] |
| + | * [[Security updates]] |
| | | |
− | Note: In case of errors, it may be needed to remove all storage devices and perform the | + | === Links === |
− | programming process with USB flash drive only
| + | * [[IPC2: Software | IPC2 Software Repository]] |
| + | * [[IPC2 BIOS guide]] |
| + | |
| + | |
| + | [[category:IPC2]] |
| + | [[Category:BIOS]] |