|
|
| (11 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | ==BIOS update procedure==
| + | [https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates] |
| − | The following procedure true under Windows 7 and Linux in non-UEFI mode operating systems:
| + | |
| | | | |
| − | #Connect at least one display via HDMI port
| + | === BIOS update instructions === |
| − | #Prepare FAT formatted USB Disk-on-key
| + | * [[IPC2 Haswell BIOS update]] |
| − | #Download the latest [[IPC2 BIOS ROM files]]
| + | * [[IPC2 Broadwell BIOS update]] |
| − | #Unzip and copy 3 files to the root directory:
| + | * [[Security updates]] |
| − | #*IPC2.cap
| + | |
| − | #*startup.nsh
| + | |
| − | #*ShellFlash64.efi
| + | |
| − | #Insert the USB flash drive and ensure no other boot-able USB devices connected
| + | |
| − | #Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"
| + | |
| − | #Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly
| + | |
| − | #Go to "Exit" and press "Exit Saving Changes"
| + | |
| − | #IPC2 will restart and BIOS update will take place
| + | |
| − | #Wait for "BIOS is updated successfully. Press any key to continue ..." message
| + | |
| − | #Remove USB disk and press ENTER
| + | |
| − | #System may do several power cycles and then boot normally
| + | |
| − | #Configure the settings of the new BIOS according to your needs
| + | |
| | | | |
| | + | === Links === |
| | + | * [[IPC2: Software | IPC2 Software Repository]] |
| | + | * [[IPC2 BIOS guide]] |
| | | | |
| | | | |
| − | '''Important notes''':
| + | [[category:IPC2]] |
| − | *In case of errors, it may be needed to remove all storage devices and perform the programming process with USB flash drive only.
| + | [[Category:BIOS]] |
| − | *Under Windows 8 and Linux in UEFI mode operating systems other procedure should be followed.
| + | |
| − | *BIOS update resets any previous display configurations, setting HDMI ports as default outputs. If a display connected via DisplayPort interface, it resets and screen will go black.
| + | |
